This is the latest recevied telemetry packets stored in our database for station/object KD6RSQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768864122 | 465 | 604 | 0 | 0 | 0 |
| 1768864002 | 458 | 603 | 0 | 0 | 0 |
| 1768863883 | 462 | 602 | 0 | 0 | 0 |
| 1768863764 | 462 | 602 | 0 | 0 | 0 |
| 1768863405 | 464 | 603 | 0 | 0 | 0 |
| 1768863286 | 461 | 603 | 0 | 0 | 0 |
| 1768863167 | 461 | 603 | 0 | 0 | 0 |
| 1768862928 | 463 | 603 | 0 | 0 | 0 |
| 1768862809 | 462 | 604 | 0 | 0 | 0 |
| 1768862689 | 464 | 603 | 0 | 0 | 0 |
| 1768862570 | 465 | 603 | 0 | 0 | 0 |
| 1768862450 | 464 | 603 | 0 | 0 | 0 |
| 1768862331 | 465 | 605 | 0 | 0 | 0 |
| 1768862092 | 466 | 607 | 0 | 0 | 0 |
| 1768861973 | 462 | 607 | 0 | 0 | 0 |
| 1768861853 | 465 | 607 | 0 | 0 | 0 |
| 1768861262 | 463 | 611 | 0 | 0 | 0 |
| 1768861143 | 466 | 608 | 0 | 0 | 0 |
| 1768859991 | 464 | 608 | 0 | 0 | 0 |
| 1768859872 | 464 | 605 | 0 | 0 | 0 |
| 1768859753 | 465 | 602 | 0 | 0 | 0 |
| 1768857622 | 464 | 607 | 0 | 0 | 0 |
| 1768857502 | 465 | 605 | 0 | 0 | 0 |
| 1768857383 | 465 | 602 | 0 | 0 | 0 |
| 1768857264 | 466 | 599 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)