This is the latest recevied telemetry packets stored in our database for station/object 5P0A-27. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758637971 | 28.2 C | 46.49 % | 1028.13 hPa | 0 | 0 |
| 1758632790 | 16.8 C | 62.85 % | 1027.25 hPa | 0 | 0 |
| 1758624470 | 16.9 C | 81.47 % | 1027.38 hPa | 0 | 0 |
| 1758624213 | 15.5 C | 82.79 % | 1028.13 hPa | 0 | 0 |
| 1758576097 | 8.1 C | 82.52 % | 1022.25 hPa | 0 | 0 |
| 1758567067 | 10.2 C | 77.55 % | 1023 hPa | 0 | 0 |
| 1758558037 | 12.4 C | 71.62 % | 1022.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)