This is the latest recevied telemetry packets stored in our database for station/object EA8DEC-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768160506 | 388 | 0 | 0 | 0 | 0 |
| 1768158711 | 389 | 0 | 0 | 0 | 0 |
| 1768131770 | 391 | 0 | 0 | 0 | 0 |
| 1768129970 | 389 | 0 | 0 | 0 | 0 |
| 1768128171 | 393 | 0 | 0 | 0 | 0 |
| 1768126371 | 390 | 0 | 0 | 0 | 0 |
| 1768124570 | 389 | 0 | 0 | 0 | 0 |
| 1768122770 | 384 | 0 | 0 | 0 | 0 |
| 1768120970 | 383 | 0 | 0 | 0 | 0 |
| 1768119171 | 380 | 0 | 0 | 0 | 0 |
| 1768117371 | 380 | 0 | 0 | 0 | 0 |
| 1768115572 | 380 | 0 | 0 | 0 | 0 |
| 1768113772 | 381 | 0 | 0 | 0 | 0 |
| 1768111972 | 381 | 0 | 0 | 0 | 0 |
| 1768110172 | 381 | 0 | 0 | 0 | 0 |
| 1768108373 | 381 | 0 | 0 | 0 | 0 |
| 1768106574 | 381 | 0 | 0 | 0 | 0 |
| 1768104774 | 381 | 0 | 0 | 0 | 0 |
| 1768102974 | 382 | 0 | 0 | 0 | 0 |
| 1768101174 | 383 | 0 | 0 | 0 | 0 |
| 1768099374 | 383 | 0 | 0 | 0 | 0 |
| 1768097576 | 383 | 0 | 0 | 0 | 0 |
| 1768095776 | 384 | 0 | 0 | 0 | 0 |
| 1768093978 | 384 | 0 | 0 | 0 | 0 |
| 1768092177 | 385 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)