This is the latest recevied telemetry packets stored in our database for station/object SP8SD-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793542804 | 373 Count | 697 Count | 287 Count | 4.22 VDC | 0.14 VDC |
| 1793542502 | 366 Count | 686 Count | 281 Count | 4.21 VDC | 0.14 VDC |
| 1793542202 | 360 Count | 680 Count | 276 Count | 4.22 VDC | 0.14 VDC |
| 1793541299 | 335 Count | 635 Count | 254 Count | 4.22 VDC | 0.14 VDC |
| 1793540999 | 331 Count | 628 Count | 251 Count | 4.22 VDC | 0.14 VDC |
| 1793540698 | 323 Count | 611 Count | 244 Count | 4.22 VDC | 0.14 VDC |
| 1793540397 | 304 Count | 581 Count | 226 Count | 4.22 VDC | 0.14 VDC |
| 1793540097 | 296 Count | 563 Count | 219 Count | 4.22 VDC | 0.14 VDC |
| 1793539796 | 293 Count | 556 Count | 217 Count | 4.22 VDC | 0.14 VDC |
| 1793539495 | 289 Count | 551 Count | 214 Count | 4.21 VDC | 0.14 VDC |
| 1793539194 | 285 Count | 544 Count | 211 Count | 4.22 VDC | 0.14 VDC |
| 1793538894 | 283 Count | 535 Count | 210 Count | 4.22 VDC | 0.14 VDC |
| 1793538593 | 279 Count | 528 Count | 207 Count | 4.22 VDC | 0.14 VDC |
| 1793538292 | 274 Count | 514 Count | 203 Count | 4.22 VDC | 0.14 VDC |
| 1793537992 | 267 Count | 502 Count | 197 Count | 4.22 VDC | 0.14 VDC |
| 1793537691 | 262 Count | 493 Count | 193 Count | 4.22 VDC | 0.14 VDC |
| 1793537089 | 253 Count | 476 Count | 186 Count | 4.22 VDC | 0.14 VDC |
| 1793536884 | 248 Count | 476 Count | 186 Count | 4.21 VDC | 0.14 VDC |
| 1793536584 | 244 Count | 466 Count | 183 Count | 4.21 VDC | 0.14 VDC |
| 1793536283 | 240 Count | 454 Count | 180 Count | 4.22 VDC | 0.14 VDC |
| 1793535982 | 238 Count | 444 Count | 179 Count | 4.21 VDC | 0.14 VDC |
| 1793535681 | 232 Count | 436 Count | 174 Count | 4.21 VDC | 0.14 VDC |
| 1793535381 | 228 Count | 430 Count | 171 Count | 4.21 VDC | 0.14 VDC |
| 1793535080 | 225 Count | 424 Count | 169 Count | 4.21 VDC | 0.14 VDC |
| 1793534779 | 219 Count | 416 Count | 164 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)