This is the latest recevied telemetry packets stored in our database for station/object SP2KDS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785395445 | 2 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1785393645 | 1 Count | 110 Count | 0 Count | 0 VDC | 0 VDC |
| 1785391844 | 0 Count | 50 Count | 0 Count | 0 VDC | 0 VDC |
| 1785390043 | 25 Count | 1039 Count | 1 Count | 0 VDC | 0 VDC |
| 1785388243 | 24 Count | 977 Count | 1 Count | 0 VDC | 0 VDC |
| 1785386442 | 20 Count | 920 Count | 1 Count | 0 VDC | 0 VDC |
| 1785384642 | 19 Count | 852 Count | 1 Count | 0 VDC | 0 VDC |
| 1785382841 | 18 Count | 796 Count | 1 Count | 0 VDC | 0 VDC |
| 1785381040 | 17 Count | 749 Count | 1 Count | 0 VDC | 0 VDC |
| 1785379240 | 16 Count | 711 Count | 1 Count | 0 VDC | 0 VDC |
| 1785377439 | 15 Count | 654 Count | 1 Count | 0 VDC | 0 VDC |
| 1785375639 | 14 Count | 610 Count | 1 Count | 0 VDC | 0 VDC |
| 1785373838 | 13 Count | 562 Count | 1 Count | 0 VDC | 0 VDC |
| 1785372037 | 12 Count | 517 Count | 1 Count | 0 VDC | 0 VDC |
| 1785370237 | 11 Count | 472 Count | 1 Count | 0 VDC | 0 VDC |
| 1785368436 | 10 Count | 431 Count | 1 Count | 0 VDC | 0 VDC |
| 1785366635 | 9 Count | 371 Count | 1 Count | 0 VDC | 0 VDC |
| 1785364835 | 8 Count | 339 Count | 1 Count | 0 VDC | 0 VDC |
| 1785363034 | 7 Count | 297 Count | 1 Count | 0 VDC | 0 VDC |
| 1785361233 | 6 Count | 263 Count | 1 Count | 0 VDC | 0 VDC |
| 1785359432 | 5 Count | 223 Count | 1 Count | 0 VDC | 0 VDC |
| 1785357632 | 4 Count | 191 Count | 1 Count | 0 VDC | 0 VDC |
| 1785355831 | 3 Count | 148 Count | 1 Count | 0 VDC | 0 VDC |
| 1785354030 | 2 Count | 114 Count | 1 Count | 0 VDC | 0 VDC |
| 1785352230 | 0 Count | 54 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)