This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763867654 | -2.4 C | 8165 | 0 | 0 | 0 |
| 1763865847 | -2.4 C | 8175 | 0 | 0 | 0 |
| 1763864944 | -2.3 C | 8152 | 0 | 0 | 0 |
| 1763864041 | -2.3 C | 8190 | 0 | 0 | 0 |
| 1763863138 | -2.3 C | 8162 | 0 | 0 | 0 |
| 1763862235 | -2.2 C | 8163 | 0 | 0 | 0 |
| 1763862084 | -2.2 C | 8111 | 0 | 0 | 0 |
| 1763861948 | -2.2 C | 8198 | 0 | 0 | 0 |
| 1763860142 | -2.1 C | 8185 | 0 | 0 | 0 |
| 1763859239 | -2.1 C | 8178 | 0 | 0 | 0 |
| 1763858336 | -2 C | 8209 | 0 | 0 | 0 |
| 1763857433 | -2 C | 8186 | 0 | 0 | 0 |
| 1763856530 | -1.9 C | 8169 | 0 | 0 | 0 |
| 1763855627 | -1.8 C | 8181 | 0 | 0 | 0 |
| 1763854724 | -1.7 C | 8181 | 0 | 0 | 0 |
| 1763853821 | -1.7 C | 8191 | 0 | 0 | 0 |
| 1763852918 | -1.5 C | 8186 | 0 | 0 | 0 |
| 1763852015 | -1.4 C | 8199 | 0 | 0 | 0 |
| 1763851112 | -1.3 C | 8179 | 0 | 0 | 0 |
| 1763850209 | -1.2 C | 8196 | 0 | 0 | 0 |
| 1763849306 | -1.1 C | 8175 | 0 | 0 | 0 |
| 1763848403 | -1 C | 8196 | 0 | 0 | 0 |
| 1763847500 | -0.9 C | 8190 | 0 | 0 | 0 |
| 1763846597 | -0.8 C | 8199 | 0 | 0 | 0 |
| 1763845694 | -0.7 C | 8206 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)