This is the latest recevied telemetry packets stored in our database for station/object KE0AIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746158980 | 479 | 642 | 0 | 0 | 0 |
| 1746158861 | 478 | 640 | 0 | 0 | 0 |
| 1746158622 | 478 | 637 | 0 | 0 | 0 |
| 1746158501 | 478 | 636 | 0 | 0 | 0 |
| 1746158381 | 476 | 634 | 0 | 0 | 0 |
| 1746158262 | 479 | 632 | 0 | 0 | 0 |
| 1746158142 | 477 | 630 | 0 | 0 | 0 |
| 1746158022 | 478 | 627 | 0 | 0 | 0 |
| 1746157904 | 479 | 625 | 0 | 0 | 0 |
| 1746157665 | 479 | 619 | 0 | 0 | 0 |
| 1746157545 | 477 | 616 | 0 | 0 | 0 |
| 1746157306 | 479 | 607 | 0 | 0 | 0 |
| 1746157187 | 479 | 602 | 0 | 0 | 0 |
| 1746157067 | 477 | 597 | 0 | 0 | 0 |
| 1746156948 | 478 | 592 | 0 | 0 | 0 |
| 1746156828 | 477 | 589 | 0 | 0 | 0 |
| 1746148872 | 441 | 627 | 0 | 0 | 0 |
| 1746148752 | 469 | 627 | 0 | 0 | 0 |
| 1746148632 | 471 | 626 | 0 | 0 | 0 |
| 1746148512 | 468 | 626 | 0 | 0 | 0 |
| 1746148393 | 451 | 625 | 0 | 0 | 0 |
| 1746148273 | 480 | 625 | 0 | 0 | 0 |
| 1746148153 | 479 | 623 | 0 | 0 | 0 |
| 1746148034 | 479 | 623 | 0 | 0 | 0 |
| 1746147913 | 479 | 622 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)