This is the latest recevied telemetry packets stored in our database for station/object LZ1NAG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766031847 | 20.1 C | 41.58 % | 1034.25 hPa | 0 | 0 |
| 1766031336 | 18.4 C | 44.33 % | 1032.25 hPa | 0 | 0 |
| 1766030146 | -0.9 C | 68.73 % | 950.75 hPa | 0 | 0 |
| 1765983708 | 12.6 C | 56.91 % | 1034.25 hPa | 0 | 0 |
| 1765976992 | 21.6 C | 45.62 % | 1031.75 hPa | 0 | 0 |
| 1765976694 | 18.6 C | 50.45 % | 1032 hPa | 0 | 0 |
| 1765976506 | 16.1 C | 57.46 % | 1034.75 hPa | 0 | 0 |
| 1765976211 | 10 C | 78.33 % | 963 hPa | 0 | 0 |
| 1765972455 | 12.9 C | 58.12 % | 1031.88 hPa | 0 | 0 |
| 1765970802 | 6.1 C | 75 % | 963.38 hPa | 0 | 0 |
| 1765953501 | 18.1 C | 42.11 % | 1032.88 hPa | 0 | 0 |
| 1765952984 | 11.1 C | 54.66 % | 1033.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)