This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773435823 | 383 Count | 648 Count | 318 Count | 0 VDC | 0 VDC |
| 1773434020 | 342 Count | 572 Count | 285 Count | 0 VDC | 0 VDC |
| 1773432216 | 301 Count | 498 Count | 251 Count | 0 VDC | 0 VDC |
| 1773430412 | 260 Count | 419 Count | 217 Count | 0 VDC | 0 VDC |
| 1773428608 | 220 Count | 349 Count | 184 Count | 0 VDC | 0 VDC |
| 1773426802 | 171 Count | 271 Count | 142 Count | 0 VDC | 0 VDC |
| 1773424998 | 131 Count | 205 Count | 109 Count | 0 VDC | 0 VDC |
| 1773423195 | 85 Count | 136 Count | 70 Count | 0 VDC | 0 VDC |
| 1773421391 | 44 Count | 70 Count | 37 Count | 0 VDC | 0 VDC |
| 1773419587 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773417828 | 564 Count | 928 Count | 464 Count | 0 VDC | 0 VDC |
| 1773416024 | 513 Count | 845 Count | 420 Count | 0 VDC | 0 VDC |
| 1773414220 | 470 Count | 767 Count | 384 Count | 0 VDC | 0 VDC |
| 1773412413 | 429 Count | 687 Count | 351 Count | 0 VDC | 0 VDC |
| 1773410610 | 384 Count | 627 Count | 313 Count | 0 VDC | 0 VDC |
| 1773408806 | 341 Count | 568 Count | 277 Count | 0 VDC | 0 VDC |
| 1773407002 | 299 Count | 516 Count | 243 Count | 0 VDC | 0 VDC |
| 1773405198 | 261 Count | 451 Count | 212 Count | 0 VDC | 0 VDC |
| 1773403395 | 223 Count | 392 Count | 181 Count | 0 VDC | 0 VDC |
| 1773401591 | 183 Count | 312 Count | 148 Count | 0 VDC | 0 VDC |
| 1773399787 | 141 Count | 247 Count | 113 Count | 0 VDC | 0 VDC |
| 1773397983 | 99 Count | 178 Count | 78 Count | 0 VDC | 0 VDC |
| 1773276198 | 98 Count | 178 Count | 78 Count | 0 VDC | 0 VDC |
| 1773274395 | 69 Count | 123 Count | 56 Count | 0 VDC | 0 VDC |
| 1773272591 | 35 Count | 61 Count | 29 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)