This is the latest recevied telemetry packets stored in our database for station/object HB9IMG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792878939 | 755 Count | 376 Count | 350 Count | 0 VDC | 0 VDC |
| 1792875366 | 742 Count | 369 Count | 343 Count | 0 VDC | 0 VDC |
| 1792873563 | 739 Count | 367 Count | 341 Count | 0 VDC | 0 VDC |
| 1792871760 | 733 Count | 362 Count | 336 Count | 0 VDC | 0 VDC |
| 1792869956 | 732 Count | 362 Count | 336 Count | 0 VDC | 0 VDC |
| 1792868152 | 731 Count | 362 Count | 336 Count | 0 VDC | 0 VDC |
| 1792866349 | 729 Count | 361 Count | 335 Count | 0 VDC | 0 VDC |
| 1792864546 | 726 Count | 359 Count | 333 Count | 0 VDC | 0 VDC |
| 1792862742 | 719 Count | 353 Count | 327 Count | 0 VDC | 0 VDC |
| 1792859139 | 700 Count | 336 Count | 310 Count | 0 VDC | 0 VDC |
| 1792857332 | 695 Count | 332 Count | 306 Count | 0 VDC | 0 VDC |
| 1792855567 | 685 Count | 327 Count | 301 Count | 0 VDC | 0 VDC |
| 1792853764 | 680 Count | 323 Count | 297 Count | 0 VDC | 0 VDC |
| 1792851960 | 676 Count | 320 Count | 294 Count | 0 VDC | 0 VDC |
| 1792848353 | 662 Count | 308 Count | 282 Count | 0 VDC | 0 VDC |
| 1792846550 | 656 Count | 303 Count | 277 Count | 0 VDC | 0 VDC |
| 1792844747 | 652 Count | 300 Count | 274 Count | 0 VDC | 0 VDC |
| 1792841140 | 640 Count | 290 Count | 264 Count | 0 VDC | 0 VDC |
| 1792837533 | 630 Count | 282 Count | 256 Count | 0 VDC | 0 VDC |
| 1792835729 | 625 Count | 278 Count | 252 Count | 0 VDC | 0 VDC |
| 1792824951 | 600 Count | 263 Count | 237 Count | 0 VDC | 0 VDC |
| 1792819541 | 585 Count | 251 Count | 225 Count | 0 VDC | 0 VDC |
| 1792812360 | 564 Count | 238 Count | 212 Count | 0 VDC | 0 VDC |
| 1792810557 | 558 Count | 233 Count | 207 Count | 0 VDC | 0 VDC |
| 1792808753 | 553 Count | 229 Count | 203 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)