This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785370523 | 168 Count | 709 Count | 120 Count | 0 VDC | 0 VDC |
| 1785368723 | 165 Count | 697 Count | 118 Count | 0 VDC | 0 VDC |
| 1785366922 | 163 Count | 686 Count | 117 Count | 0 VDC | 0 VDC |
| 1785365121 | 157 Count | 669 Count | 112 Count | 0 VDC | 0 VDC |
| 1785363320 | 154 Count | 656 Count | 110 Count | 0 VDC | 0 VDC |
| 1785361520 | 151 Count | 645 Count | 108 Count | 0 VDC | 0 VDC |
| 1785359727 | 148 Count | 633 Count | 106 Count | 0 VDC | 0 VDC |
| 1785357926 | 145 Count | 621 Count | 104 Count | 0 VDC | 0 VDC |
| 1785356125 | 142 Count | 610 Count | 102 Count | 0 VDC | 0 VDC |
| 1785354324 | 139 Count | 590 Count | 100 Count | 0 VDC | 0 VDC |
| 1785352524 | 136 Count | 570 Count | 98 Count | 0 VDC | 0 VDC |
| 1785350723 | 133 Count | 558 Count | 96 Count | 0 VDC | 0 VDC |
| 1785348922 | 130 Count | 545 Count | 94 Count | 0 VDC | 0 VDC |
| 1785347122 | 127 Count | 531 Count | 92 Count | 0 VDC | 0 VDC |
| 1785345321 | 125 Count | 520 Count | 91 Count | 0 VDC | 0 VDC |
| 1785343520 | 119 Count | 501 Count | 86 Count | 0 VDC | 0 VDC |
| 1785341720 | 116 Count | 489 Count | 84 Count | 0 VDC | 0 VDC |
| 1785339919 | 113 Count | 479 Count | 82 Count | 0 VDC | 0 VDC |
| 1785338127 | 110 Count | 468 Count | 80 Count | 0 VDC | 0 VDC |
| 1785336326 | 107 Count | 456 Count | 78 Count | 0 VDC | 0 VDC |
| 1785334524 | 104 Count | 444 Count | 76 Count | 0 VDC | 0 VDC |
| 1785332723 | 101 Count | 428 Count | 74 Count | 0 VDC | 0 VDC |
| 1785330923 | 98 Count | 411 Count | 72 Count | 0 VDC | 0 VDC |
| 1785329122 | 95 Count | 399 Count | 70 Count | 0 VDC | 0 VDC |
| 1785327321 | 92 Count | 385 Count | 68 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)