This is the latest recevied telemetry packets stored in our database for station/object OK4AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Battery* | Satellite* |
|---|---|---|---|---|---|
| 1768824863 | 0 °C | 28.39 % | 985.1 hPa | 0 V | 12 |
| 1768824850 | 0 °C | 28.07 % | 985.1 hPa | 0 V | 12 |
| 1768824774 | 0 °C | 29.16 % | 984.6 hPa | 0 V | 12 |
| 1768824766 | 0 °C | 29.39 % | 984.5 hPa | 0 V | 12 |
| 1768824731 | 0 °C | 29.75 % | 984.4 hPa | 0 V | 12 |
| 1768824697 | 0 °C | 29.84 % | 984.9 hPa | 0 V | 12 |
| 1768824661 | 0 °C | 29.79 % | 986.8 hPa | 0 V | 12 |
| 1768824627 | 0 °C | 30.01 % | 988.9 hPa | 0 V | 12 |
| 1768824599 | 0 °C | 30.05 % | 990.9 hPa | 0 V | 12 |
| 1768824570 | 0 °C | 30.18 % | 993.1 hPa | 0 V | 12 |
| 1768824533 | 0 °C | 29.93 % | 996.8 hPa | 0 V | 12 |
| 1768824519 | 0 °C | 30.36 % | 997.7 hPa | 0 V | 12 |
| 1768824510 | 0 °C | 30.41 % | 998.5 hPa | 0 V | 12 |
| 1768824499 | 0 °C | 30.42 % | 999.2 hPa | 0 V | 12 |
| 1768824490 | 0 °C | 30.62 % | 999.9 hPa | 0 V | 12 |
| 1768824482 | 0 °C | 30.75 % | 1000.6 hPa | 0 V | 12 |
| 1768824473 | 0 °C | 30.73 % | 1001.2 hPa | 0 V | 12 |
| 1768824463 | 0 °C | 30.78 % | 1001.8 hPa | 0 V | 12 |
| 1768824424 | 0 °C | 31.02 % | 1002.9 hPa | 0 V | 12 |
| 1768824416 | 0 °C | 31.02 % | 1002.9 hPa | 0 V | 12 |
| 1768824396 | 0 °C | 31.03 % | 1003 hPa | 0 V | 12 |
| 1768824359 | 0 °C | 31.27 % | 1003 hPa | 0 V | 12 |
| 1768824276 | 0 °C | 29.96 % | 1002.9 hPa | 0 V | 12 |
| 1768824265 | 0 °C | 30.66 % | 1002.9 hPa | 0 V | 12 |
| 1768824256 | 0 °C | 31.35 % | 1002.9 hPa | 0 V | 12 |
*Used Equation Coefficients:
Temperatu: 0, 0.01, 0
Humidity: 0, 0.01, 0
Pressure: 0, 0.1, 800
Battery: 0, 0.01, 0
Satellite: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)