This is the latest recevied telemetry packets stored in our database for station/object SQ9WRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788980765 | 205 Count | 164 Count | 47 Count | 0 VDC | 0 VDC |
| 1788980464 | 204 Count | 164 Count | 47 Count | 0 VDC | 0 VDC |
| 1788980163 | 202 Count | 163 Count | 46 Count | 0 VDC | 0 VDC |
| 1788979863 | 201 Count | 162 Count | 46 Count | 0 VDC | 0 VDC |
| 1788979585 | 200 Count | 162 Count | 46 Count | 0 VDC | 0 VDC |
| 1788979284 | 198 Count | 161 Count | 45 Count | 0 VDC | 0 VDC |
| 1788978983 | 197 Count | 161 Count | 45 Count | 0 VDC | 0 VDC |
| 1788978682 | 196 Count | 161 Count | 45 Count | 0 VDC | 0 VDC |
| 1788978381 | 194 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788978081 | 193 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788977779 | 192 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788977479 | 191 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788977178 | 190 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788976877 | 189 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788976576 | 188 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788976275 | 187 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788975974 | 186 Count | 160 Count | 44 Count | 0 VDC | 0 VDC |
| 1788975673 | 183 Count | 159 Count | 43 Count | 0 VDC | 0 VDC |
| 1788975372 | 182 Count | 159 Count | 43 Count | 0 VDC | 0 VDC |
| 1788975071 | 181 Count | 159 Count | 43 Count | 0 VDC | 0 VDC |
| 1788974769 | 179 Count | 158 Count | 42 Count | 0 VDC | 0 VDC |
| 1788974468 | 178 Count | 157 Count | 42 Count | 0 VDC | 0 VDC |
| 1788974167 | 177 Count | 156 Count | 42 Count | 0 VDC | 0 VDC |
| 1788973866 | 175 Count | 155 Count | 41 Count | 0 VDC | 0 VDC |
| 1788973565 | 174 Count | 155 Count | 41 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)