This is the latest recevied telemetry packets stored in our database for station/object SP6RGZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788972380 | 964 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788970580 | 963 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788968779 | 962 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788966978 | 961 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788965178 | 960 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788963377 | 959 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788961576 | 958 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788959775 | 957 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788957975 | 956 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788956181 | 955 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788954381 | 954 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788952580 | 953 Count | 154 Count | 138 Count | 0 VDC | 0 VDC |
| 1788950779 | 941 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788948978 | 940 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788947178 | 939 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788945377 | 938 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788943576 | 937 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788941775 | 936 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788939975 | 935 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788938174 | 934 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788936373 | 933 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788934581 | 932 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788932780 | 931 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788930980 | 930 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
| 1788929179 | 929 Count | 143 Count | 127 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)