This is the latest recevied telemetry packets stored in our database for station/object AI0Z-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
05/30/2025 7:34:29 PM+00:00 | 401 | 622 | 0 | 0 | 0 |
05/30/2025 7:28:31 PM+00:00 | 463 | 619 | 0 | 0 | 0 |
05/30/2025 7:26:58 PM+00:00 | 463 | 616 | 0 | 0 | 0 |
05/30/2025 7:25:54 PM+00:00 | 463 | 613 | 0 | 0 | 0 |
05/30/2025 7:23:57 PM+00:00 | 460 | 614 | 0 | 0 | 0 |
05/30/2025 7:23:44 PM+00:00 | 459 | 612 | 0 | 0 | 0 |
05/30/2025 7:22:16 PM+00:00 | 438 | 611 | 0 | 0 | 0 |
05/30/2025 7:09:26 PM+00:00 | 460 | 615 | 0 | 0 | 0 |
05/30/2025 7:09:19 PM+00:00 | 467 | 619 | 0 | 0 | 0 |
05/30/2025 7:08:59 PM+00:00 | 460 | 621 | 0 | 0 | 0 |
05/30/2025 7:08:50 PM+00:00 | 462 | 620 | 0 | 0 | 0 |
05/30/2025 7:08:41 PM+00:00 | 463 | 619 | 0 | 0 | 0 |
05/30/2025 7:05:47 PM+00:00 | 465 | 616 | 0 | 0 | 0 |
05/30/2025 7:03:35 PM+00:00 | 464 | 614 | 0 | 0 | 0 |
05/30/2025 7:01:15 PM+00:00 | 464 | 610 | 0 | 0 | 0 |
05/30/2025 6:59:18 PM+00:00 | 463 | 604 | 0 | 0 | 0 |
05/30/2025 6:57:18 PM+00:00 | 461 | 600 | 0 | 0 | 0 |
05/30/2025 6:56:28 PM+00:00 | 459 | 598 | 0 | 0 | 0 |
05/30/2025 4:18:33 PM+00:00 | 463 | 596 | 0 | 0 | 0 |
05/29/2025 11:42:19 PM+00:00 | 443 | 632 | 0 | 0 | 0 |
05/29/2025 11:36:35 PM+00:00 | 439 | 629 | 0 | 0 | 0 |
05/29/2025 11:35:04 PM+00:00 | 452 | 631 | 0 | 0 | 0 |
05/29/2025 11:33:57 PM+00:00 | 468 | 631 | 0 | 0 | 0 |
05/29/2025 11:31:54 PM+00:00 | 468 | 629 | 0 | 0 | 0 |
05/29/2025 11:31:48 PM+00:00 | 469 | 627 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)