This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792864045 | 212 Count | 874 Count | 121 Count | 4.24 VDC | 0.14 VDC |
| 1792863745 | 209 Count | 865 Count | 119 Count | 4.22 VDC | 0.14 VDC |
| 1792863443 | 207 Count | 857 Count | 118 Count | 4.24 VDC | 0.14 VDC |
| 1792863143 | 204 Count | 846 Count | 116 Count | 4.26 VDC | 0.14 VDC |
| 1792862842 | 203 Count | 838 Count | 116 Count | 4.25 VDC | 0.14 VDC |
| 1792862541 | 200 Count | 827 Count | 114 Count | 4.19 VDC | 0.14 VDC |
| 1792862241 | 198 Count | 816 Count | 113 Count | 4.27 VDC | 0.14 VDC |
| 1792861940 | 196 Count | 811 Count | 112 Count | 4.22 VDC | 0.14 VDC |
| 1792861640 | 193 Count | 795 Count | 110 Count | 4.2 VDC | 0.14 VDC |
| 1792861383 | 187 Count | 783 Count | 109 Count | 4.25 VDC | 0.14 VDC |
| 1792861083 | 185 Count | 775 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1792860782 | 183 Count | 761 Count | 107 Count | 4.24 VDC | 0.14 VDC |
| 1792860481 | 180 Count | 746 Count | 105 Count | 4.26 VDC | 0.14 VDC |
| 1792860181 | 179 Count | 732 Count | 105 Count | 4.23 VDC | 0.14 VDC |
| 1792859580 | 174 Count | 715 Count | 102 Count | 4.25 VDC | 0.14 VDC |
| 1792859279 | 172 Count | 708 Count | 101 Count | 4.26 VDC | 0.14 VDC |
| 1792858978 | 169 Count | 691 Count | 99 Count | 4.21 VDC | 0.14 VDC |
| 1792858678 | 167 Count | 675 Count | 98 Count | 4.27 VDC | 0.14 VDC |
| 1792858377 | 164 Count | 653 Count | 96 Count | 4.22 VDC | 0.14 VDC |
| 1792858077 | 162 Count | 641 Count | 95 Count | 4.22 VDC | 0.14 VDC |
| 1792857776 | 160 Count | 631 Count | 94 Count | 4.25 VDC | 0.14 VDC |
| 1792857476 | 158 Count | 623 Count | 93 Count | 4.19 VDC | 0.14 VDC |
| 1792856873 | 154 Count | 596 Count | 91 Count | 4.27 VDC | 0.14 VDC |
| 1792856573 | 150 Count | 580 Count | 88 Count | 4.26 VDC | 0.14 VDC |
| 1792856272 | 146 Count | 569 Count | 85 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)