This is the latest recevied telemetry packets stored in our database for station/object KJ7EBU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1748068693 | 12.95 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748068574 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748068454 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748068216 | 12.95 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748068096 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748067977 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748067738 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748067499 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748067380 | 12.95 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748067260 | 12.98 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1748067021 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748066902 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748066663 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748066543 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748066185 | 12.95 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748066066 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748065946 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748065827 | 12.98 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1748065588 | 12.98 Volts | 100.25 Deg.F | 0 | 0 | 0 |
| 1748064871 | 12.98 Volts | 100.25 Deg.F | 0 | 0 | 0 |
| 1748064154 | 12.98 Volts | 101.13 Deg.F | 0 | 0 | 0 |
| 1748064035 | 12.98 Volts | 101.13 Deg.F | 0 | 0 | 0 |
| 1748063916 | 12.98 Volts | 102.01 Deg.F | 0 | 0 | 0 |
| 1748063796 | 12.98 Volts | 101.13 Deg.F | 0 | 0 | 0 |
| 1748063557 | 12.98 Volts | 101.13 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)