This is the latest recevied telemetry packets stored in our database for station/object OR7F-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Temperature* | Humidity* | Value5* |
|---|---|---|---|---|---|
| 1746355223 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746354923 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746354623 | 15 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746354323 | 15 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746354023 | 15 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746353723 | 15 Nr | 13.16 Vdc | -50 deg.C | 0 % | 0 |
| 1746353423 | 14 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746353123 | 14 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746352823 | 14 Nr | 13.16 Vdc | -50 deg.C | 0 % | 0 |
| 1746352523 | 14 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746352223 | 14 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746351923 | 14 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746351623 | 13 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746351323 | 13 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746351023 | 14 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746350723 | 15 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746350423 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746350123 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746349823 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746349523 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746348923 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746348623 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746348324 | 16 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
| 1746347423 | 15 Nr | 13.12 Vdc | -50 deg.C | 0 % | 0 |
| 1746347123 | 15 Nr | 13.14 Vdc | -50 deg.C | 0 % | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Temperature: 0, 0.02, -50
Humidity: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)