This is the latest recevied telemetry packets stored in our database for station/object AE6LA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 05/07/2025 3:43:13 AM+00:00 | 442 | 624 | 0 | 0 | 0 |
| 05/07/2025 3:42:49 AM+00:00 | 443 | 623 | 0 | 0 | 0 |
| 05/07/2025 3:42:36 AM+00:00 | 447 | 622 | 0 | 0 | 0 |
| 05/07/2025 3:42:27 AM+00:00 | 446 | 622 | 0 | 0 | 0 |
| 05/07/2025 3:42:15 AM+00:00 | 445 | 621 | 0 | 0 | 0 |
| 05/07/2025 3:42:11 AM+00:00 | 446 | 621 | 0 | 0 | 0 |
| 05/07/2025 3:42:06 AM+00:00 | 447 | 621 | 0 | 0 | 0 |
| 05/07/2025 3:41:47 AM+00:00 | 446 | 620 | 0 | 0 | 0 |
| 05/07/2025 3:41:04 AM+00:00 | 444 | 619 | 0 | 0 | 0 |
| 05/07/2025 3:40:38 AM+00:00 | 444 | 618 | 0 | 0 | 0 |
| 05/07/2025 3:40:12 AM+00:00 | 446 | 617 | 0 | 0 | 0 |
| 05/07/2025 3:39:58 AM+00:00 | 448 | 617 | 0 | 0 | 0 |
| 05/07/2025 3:39:44 AM+00:00 | 448 | 616 | 0 | 0 | 0 |
| 05/07/2025 3:39:15 AM+00:00 | 444 | 615 | 0 | 0 | 0 |
| 05/07/2025 3:38:43 AM+00:00 | 439 | 615 | 0 | 0 | 0 |
| 05/07/2025 3:38:24 AM+00:00 | 436 | 615 | 0 | 0 | 0 |
| 05/07/2025 2:21:28 AM+00:00 | 441 | 634 | 0 | 0 | 0 |
| 05/07/2025 2:20:49 AM+00:00 | 450 | 634 | 0 | 0 | 0 |
| 05/07/2025 2:20:44 AM+00:00 | 447 | 634 | 0 | 0 | 0 |
| 05/07/2025 2:19:51 AM+00:00 | 450 | 634 | 0 | 0 | 0 |
| 05/07/2025 2:18:46 AM+00:00 | 449 | 635 | 0 | 0 | 0 |
| 05/07/2025 2:17:38 AM+00:00 | 444 | 635 | 0 | 0 | 0 |
| 05/07/2025 2:17:02 AM+00:00 | 444 | 635 | 0 | 0 | 0 |
| 05/07/2025 2:16:08 AM+00:00 | 437 | 635 | 0 | 0 | 0 |
| 05/07/2025 2:15:58 AM+00:00 | 434 | 635 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)