This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758100368 | 419 Count | 948 Count | 405 Count | 4.41 VDC | 0 VDC |
| 1758098566 | 377 Count | 857 Count | 364 Count | 4.42 VDC | 0 VDC |
| 1758096765 | 339 Count | 769 Count | 327 Count | 4.39 VDC | 0 VDC |
| 1758094965 | 308 Count | 694 Count | 297 Count | 4.41 VDC | 0 VDC |
| 1758093164 | 274 Count | 622 Count | 264 Count | 4.39 VDC | 0 VDC |
| 1758091369 | 238 Count | 536 Count | 233 Count | 4.41 VDC | 0 VDC |
| 1758089568 | 203 Count | 437 Count | 199 Count | 4.4 VDC | 0 VDC |
| 1758087767 | 142 Count | 335 Count | 139 Count | 4.41 VDC | 0 VDC |
| 1758085966 | 82 Count | 218 Count | 80 Count | 4.42 VDC | 0 VDC |
| 1758084166 | 54 Count | 139 Count | 53 Count | 4.41 VDC | 0 VDC |
| 1758082365 | 19 Count | 52 Count | 19 Count | 4.41 VDC | 0 VDC |
| 1758080564 | 480 Count | 1006 Count | 461 Count | 4.41 VDC | 0 VDC |
| 1758078764 | 461 Count | 964 Count | 443 Count | 4.4 VDC | 0 VDC |
| 1758076963 | 436 Count | 906 Count | 419 Count | 4.39 VDC | 0 VDC |
| 1758075162 | 411 Count | 854 Count | 395 Count | 4.42 VDC | 0 VDC |
| 1758073362 | 392 Count | 807 Count | 377 Count | 4.4 VDC | 0 VDC |
| 1758071561 | 374 Count | 763 Count | 360 Count | 4.42 VDC | 0 VDC |
| 1758069801 | 351 Count | 714 Count | 342 Count | 4.4 VDC | 0 VDC |
| 1758068000 | 331 Count | 668 Count | 323 Count | 4.4 VDC | 0 VDC |
| 1758066199 | 292 Count | 589 Count | 285 Count | 4.43 VDC | 0 VDC |
| 1758064399 | 255 Count | 513 Count | 249 Count | 4.42 VDC | 0 VDC |
| 1758062598 | 219 Count | 446 Count | 214 Count | 4.39 VDC | 0 VDC |
| 1758060797 | 184 Count | 375 Count | 180 Count | 4.39 VDC | 0 VDC |
| 1758058996 | 149 Count | 302 Count | 146 Count | 4.43 VDC | 0 VDC |
| 1758057195 | 113 Count | 231 Count | 111 Count | 4.4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)