This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785407743 | 286 Count | 506 Count | 216 Count | 0 VDC | 0 VDC |
| 1785405940 | 281 Count | 500 Count | 212 Count | 0 VDC | 0 VDC |
| 1785402369 | 267 Count | 490 Count | 204 Count | 0 VDC | 0 VDC |
| 1785400566 | 262 Count | 485 Count | 200 Count | 0 VDC | 0 VDC |
| 1785396960 | 252 Count | 475 Count | 192 Count | 0 VDC | 0 VDC |
| 1785395157 | 247 Count | 470 Count | 188 Count | 0 VDC | 0 VDC |
| 1785393353 | 242 Count | 465 Count | 184 Count | 0 VDC | 0 VDC |
| 1785391551 | 237 Count | 460 Count | 180 Count | 0 VDC | 0 VDC |
| 1785387945 | 222 Count | 441 Count | 167 Count | 0 VDC | 0 VDC |
| 1785386141 | 211 Count | 425 Count | 157 Count | 0 VDC | 0 VDC |
| 1785380766 | 180 Count | 393 Count | 133 Count | 0 VDC | 0 VDC |
| 1785378963 | 175 Count | 388 Count | 129 Count | 0 VDC | 0 VDC |
| 1785377160 | 170 Count | 383 Count | 125 Count | 0 VDC | 0 VDC |
| 1785375356 | 165 Count | 377 Count | 121 Count | 0 VDC | 0 VDC |
| 1785373553 | 160 Count | 341 Count | 117 Count | 0 VDC | 0 VDC |
| 1785371750 | 157 Count | 323 Count | 115 Count | 0 VDC | 0 VDC |
| 1785366341 | 142 Count | 224 Count | 103 Count | 0 VDC | 0 VDC |
| 1785364538 | 136 Count | 217 Count | 98 Count | 0 VDC | 0 VDC |
| 1785359163 | 117 Count | 203 Count | 86 Count | 0 VDC | 0 VDC |
| 1785357360 | 111 Count | 193 Count | 81 Count | 0 VDC | 0 VDC |
| 1785355556 | 106 Count | 187 Count | 77 Count | 0 VDC | 0 VDC |
| 1785353753 | 101 Count | 164 Count | 73 Count | 0 VDC | 0 VDC |
| 1785351950 | 93 Count | 139 Count | 66 Count | 0 VDC | 0 VDC |
| 1785350147 | 89 Count | 112 Count | 63 Count | 0 VDC | 0 VDC |
| 1785348344 | 85 Count | 107 Count | 60 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)