This is the latest recevied telemetry packets stored in our database for station/object SR2ST-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783249312 | 167 Count | 88 Count | 47 Count | 0 VDC | 0 VDC |
| 1783247632 | 150 Count | 76 Count | 41 Count | 0 VDC | 0 VDC |
| 1783246200 | 133 Count | 69 Count | 38 Count | 0 VDC | 0 VDC |
| 1783244519 | 115 Count | 58 Count | 33 Count | 0 VDC | 0 VDC |
| 1783242839 | 94 Count | 46 Count | 27 Count | 0 VDC | 0 VDC |
| 1783241158 | 76 Count | 36 Count | 22 Count | 0 VDC | 0 VDC |
| 1783239477 | 58 Count | 25 Count | 17 Count | 0 VDC | 0 VDC |
| 1783237796 | 1020 Count | 541 Count | 382 Count | 0 VDC | 0 VDC |
| 1783236115 | 997 Count | 522 Count | 377 Count | 0 VDC | 0 VDC |
| 1783224599 | 683 Count | 357 Count | 249 Count | 0 VDC | 0 VDC |
| 1783222919 | 623 Count | 326 Count | 223 Count | 0 VDC | 0 VDC |
| 1783221238 | 587 Count | 309 Count | 211 Count | 0 VDC | 0 VDC |
| 1783219557 | 562 Count | 295 Count | 202 Count | 0 VDC | 0 VDC |
| 1783217876 | 540 Count | 282 Count | 195 Count | 0 VDC | 0 VDC |
| 1783212834 | 487 Count | 253 Count | 181 Count | 0 VDC | 0 VDC |
| 1783209472 | 456 Count | 235 Count | 173 Count | 0 VDC | 0 VDC |
| 1783207791 | 432 Count | 225 Count | 166 Count | 0 VDC | 0 VDC |
| 1783206111 | 396 Count | 207 Count | 152 Count | 0 VDC | 0 VDC |
| 1783204430 | 355 Count | 180 Count | 131 Count | 0 VDC | 0 VDC |
| 1783202998 | 321 Count | 165 Count | 120 Count | 0 VDC | 0 VDC |
| 1783201318 | 283 Count | 147 Count | 107 Count | 0 VDC | 0 VDC |
| 1783199637 | 229 Count | 122 Count | 89 Count | 0 VDC | 0 VDC |
| 1783197956 | 200 Count | 107 Count | 79 Count | 0 VDC | 0 VDC |
| 1783192914 | 81 Count | 43 Count | 32 Count | 0 VDC | 0 VDC |
| 1783191233 | 47 Count | 25 Count | 20 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)