This is the latest recevied telemetry packets stored in our database for station/object LZ4NY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satellite* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745864306 | 7 ' | 4.2 V | 0 | 0 | 0 |
| 1745864292 | 7 ' | 4.2 V | 0 | 0 | 0 |
| 1745864269 | 0 ' | 4.2 V | 0 | 0 | 0 |
| 1745864254 | 0 ' | 4.2 V | 0 | 0 | 0 |
| 1745864221 | 0 ' | 4.19 V | 0 | 0 | 0 |
| 1745864171 | 3 ' | 4.2 V | 0 | 0 | 0 |
| 1745864135 | 4 ' | 4.21 V | 0 | 0 | 0 |
| 1745864125 | 4 ' | 4.2 V | 0 | 0 | 0 |
| 1745864089 | 5 ' | 4.2 V | 0 | 0 | 0 |
| 1745864066 | 4 ' | 4.19 V | 0 | 0 | 0 |
| 1745864058 | 4 ' | 4.19 V | 0 | 0 | 0 |
| 1745864049 | 4 ' | 4.19 V | 0 | 0 | 0 |
| 1745864034 | 4 ' | 4.2 V | 0 | 0 | 0 |
| 1745864018 | 3 ' | 4.2 V | 0 | 0 | 0 |
| 1745863969 | 5 ' | 4.2 V | 0 | 0 | 0 |
| 1745863953 | 3 ' | 4.2 V | 0 | 0 | 0 |
| 1745863941 | 3 ' | 4.19 V | 0 | 0 | 0 |
| 1745863909 | 6 ' | 4.19 V | 0 | 0 | 0 |
| 1745863898 | 6 ' | 4.19 V | 0 | 0 | 0 |
| 1745863890 | 0 ' | 4.2 V | 0 | 0 | 0 |
| 1745863878 | 0 ' | 4.19 V | 0 | 0 | 0 |
| 1745863866 | 6 ' | 4.2 V | 0 | 0 | 0 |
| 1745863845 | 6 ' | 4.19 V | 0 | 0 | 0 |
| 1745863830 | 5 ' | 4.16 V | 0 | 0 | 0 |
| 1745863821 | 5 ' | 4.19 V | 0 | 0 | 0 |
*Used Equation Coefficients:
Satellite: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)