This is the latest recevied telemetry packets stored in our database for station/object SP3MYP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750552230 | 950 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750550429 | 949 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750548629 | 948 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750546828 | 947 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750545027 | 946 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750543227 | 945 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750541426 | 944 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750539626 | 943 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750537836 | 942 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750536035 | 941 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750534235 | 940 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750532434 | 939 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750530634 | 938 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750528833 | 937 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750527032 | 936 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750525231 | 935 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750523431 | 934 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750521630 | 933 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750519830 | 932 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750518029 | 931 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750516235 | 930 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750514434 | 929 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750512634 | 928 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750510833 | 927 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750509032 | 926 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)