This is the latest recevied telemetry packets stored in our database for station/object KG5BQX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770011957 | 482 | 592 | 290 | 0 | 0 |
| 1770011879 | 488 | 592 | 288 | 0 | 0 |
| 1770011791 | 482 | 591 | 289 | 0 | 0 |
| 1770011700 | 481 | 590 | 291 | 0 | 0 |
| 1770011598 | 487 | 590 | 288 | 0 | 0 |
| 1770011502 | 488 | 589 | 289 | 0 | 0 |
| 1770011407 | 487 | 588 | 291 | 0 | 0 |
| 1770011366 | 491 | 587 | 293 | 0 | 0 |
| 1770011345 | 489 | 587 | 291 | 0 | 0 |
| 1770011295 | 485 | 586 | 291 | 0 | 0 |
| 1770011284 | 489 | 585 | 293 | 0 | 0 |
| 1770011196 | 494 | 584 | 293 | 0 | 0 |
| 1770011105 | 497 | 582 | 296 | 0 | 0 |
| 1770011094 | 500 | 582 | 295 | 0 | 0 |
| 1770011057 | 496 | 581 | 297 | 0 | 0 |
| 1770011051 | 499 | 580 | 297 | 0 | 0 |
| 1770011014 | 499 | 580 | 298 | 0 | 0 |
| 1770010985 | 500 | 579 | 296 | 0 | 0 |
| 1769978845 | 472 | 604 | 281 | 0 | 0 |
| 1769978838 | 475 | 604 | 279 | 0 | 0 |
| 1769978823 | 478 | 604 | 281 | 0 | 0 |
| 1769978816 | 474 | 604 | 280 | 0 | 0 |
| 1769978769 | 479 | 603 | 281 | 0 | 0 |
| 1769978754 | 480 | 603 | 282 | 0 | 0 |
| 1769978749 | 478 | 603 | 281 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)