This is the latest recevied telemetry packets stored in our database for station/object SP8KSR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788967841 | 52 Count | 68 Count | 52 Count | 0 VDC | 0 VDC |
| 1788966041 | 35 Count | 46 Count | 35 Count | 0 VDC | 0 VDC |
| 1788964241 | 18 Count | 24 Count | 18 Count | 0 VDC | 0 VDC |
| 1788962441 | 775 Count | 1012 Count | 775 Count | 0 VDC | 0 VDC |
| 1788960640 | 762 Count | 994 Count | 762 Count | 0 VDC | 0 VDC |
| 1788958840 | 744 Count | 970 Count | 744 Count | 0 VDC | 0 VDC |
| 1788957040 | 716 Count | 936 Count | 716 Count | 0 VDC | 0 VDC |
| 1788955240 | 673 Count | 888 Count | 673 Count | 0 VDC | 0 VDC |
| 1788953441 | 652 Count | 864 Count | 652 Count | 0 VDC | 0 VDC |
| 1788951641 | 639 Count | 846 Count | 639 Count | 0 VDC | 0 VDC |
| 1788949841 | 624 Count | 825 Count | 624 Count | 0 VDC | 0 VDC |
| 1788948041 | 603 Count | 798 Count | 603 Count | 0 VDC | 0 VDC |
| 1788946241 | 587 Count | 777 Count | 587 Count | 0 VDC | 0 VDC |
| 1788944441 | 572 Count | 757 Count | 572 Count | 0 VDC | 0 VDC |
| 1788942641 | 562 Count | 741 Count | 562 Count | 0 VDC | 0 VDC |
| 1788940841 | 548 Count | 721 Count | 548 Count | 0 VDC | 0 VDC |
| 1788939041 | 534 Count | 702 Count | 534 Count | 0 VDC | 0 VDC |
| 1788937241 | 520 Count | 682 Count | 520 Count | 0 VDC | 0 VDC |
| 1788935441 | 502 Count | 659 Count | 502 Count | 0 VDC | 0 VDC |
| 1788933641 | 486 Count | 637 Count | 486 Count | 0 VDC | 0 VDC |
| 1788931840 | 471 Count | 607 Count | 471 Count | 0 VDC | 0 VDC |
| 1788930039 | 453 Count | 577 Count | 453 Count | 0 VDC | 0 VDC |
| 1788928239 | 437 Count | 557 Count | 437 Count | 0 VDC | 0 VDC |
| 1788926439 | 418 Count | 533 Count | 418 Count | 0 VDC | 0 VDC |
| 1788924639 | 402 Count | 512 Count | 402 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)