This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789681936 | 389 Count | 980 Count | 356 Count | 0 VDC | 0 VDC |
| 1789680136 | 375 Count | 940 Count | 343 Count | 0 VDC | 0 VDC |
| 1789678335 | 366 Count | 913 Count | 335 Count | 0 VDC | 0 VDC |
| 1789676534 | 360 Count | 886 Count | 330 Count | 0 VDC | 0 VDC |
| 1789674733 | 352 Count | 861 Count | 323 Count | 0 VDC | 0 VDC |
| 1789672933 | 344 Count | 832 Count | 316 Count | 0 VDC | 0 VDC |
| 1789671132 | 334 Count | 797 Count | 307 Count | 0 VDC | 0 VDC |
| 1789669331 | 324 Count | 760 Count | 298 Count | 0 VDC | 0 VDC |
| 1789667531 | 307 Count | 708 Count | 282 Count | 0 VDC | 0 VDC |
| 1789665730 | 301 Count | 666 Count | 277 Count | 0 VDC | 0 VDC |
| 1789663929 | 291 Count | 620 Count | 268 Count | 0 VDC | 0 VDC |
| 1789662128 | 268 Count | 568 Count | 246 Count | 0 VDC | 0 VDC |
| 1789660335 | 217 Count | 506 Count | 200 Count | 0 VDC | 0 VDC |
| 1789658534 | 190 Count | 464 Count | 174 Count | 0 VDC | 0 VDC |
| 1789656734 | 170 Count | 421 Count | 155 Count | 0 VDC | 0 VDC |
| 1789654933 | 157 Count | 389 Count | 143 Count | 0 VDC | 0 VDC |
| 1789653132 | 140 Count | 345 Count | 127 Count | 0 VDC | 0 VDC |
| 1789649531 | 76 Count | 205 Count | 65 Count | 0 VDC | 0 VDC |
| 1789647730 | 56 Count | 165 Count | 48 Count | 0 VDC | 0 VDC |
| 1789645929 | 43 Count | 138 Count | 36 Count | 0 VDC | 0 VDC |
| 1789644128 | 33 Count | 116 Count | 27 Count | 0 VDC | 0 VDC |
| 1789642328 | 24 Count | 76 Count | 19 Count | 0 VDC | 0 VDC |
| 1789640527 | 13 Count | 24 Count | 9 Count | 0 VDC | 0 VDC |
| 1789638734 | 326 Count | 1023 Count | 293 Count | 0 VDC | 0 VDC |
| 1789636933 | 307 Count | 990 Count | 275 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)