This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777368908 | 208 Count | 414 Count | 181 Count | 4.2 VDC | 0.14 VDC |
| 1777365348 | 197 Count | 395 Count | 172 Count | 4.23 VDC | 0.14 VDC |
| 1777361739 | 167 Count | 351 Count | 144 Count | 4.23 VDC | 0.16 VDC |
| 1777358131 | 151 Count | 312 Count | 130 Count | 4.2 VDC | 0.16 VDC |
| 1777354523 | 137 Count | 284 Count | 118 Count | 4.25 VDC | 0.16 VDC |
| 1777350915 | 123 Count | 258 Count | 106 Count | 4.25 VDC | 0.16 VDC |
| 1777347307 | 109 Count | 232 Count | 94 Count | 4.23 VDC | 0.16 VDC |
| 1777343746 | 96 Count | 208 Count | 83 Count | 4.25 VDC | 0.16 VDC |
| 1777340138 | 79 Count | 180 Count | 68 Count | 4.26 VDC | 0.16 VDC |
| 1777336530 | 64 Count | 152 Count | 55 Count | 4.24 VDC | 0.16 VDC |
| 1777332922 | 51 Count | 121 Count | 44 Count | 4.23 VDC | 0.16 VDC |
| 1777329314 | 38 Count | 91 Count | 33 Count | 4.21 VDC | 0.16 VDC |
| 1777325706 | 26 Count | 59 Count | 23 Count | 4.2 VDC | 0.14 VDC |
| 1777322146 | 12 Count | 25 Count | 11 Count | 4.23 VDC | 0.16 VDC |
| 1777318538 | 543 Count | 1007 Count | 475 Count | 4.26 VDC | 0.16 VDC |
| 1777314930 | 524 Count | 976 Count | 458 Count | 4.23 VDC | 0.16 VDC |
| 1777311322 | 510 Count | 954 Count | 446 Count | 4.25 VDC | 0.16 VDC |
| 1777307713 | 495 Count | 930 Count | 433 Count | 4.23 VDC | 0.16 VDC |
| 1777304105 | 481 Count | 904 Count | 421 Count | 4.2 VDC | 0.16 VDC |
| 1777300545 | 469 Count | 882 Count | 411 Count | 4.21 VDC | 0.16 VDC |
| 1777296936 | 455 Count | 864 Count | 399 Count | 4.24 VDC | 0.16 VDC |
| 1777293328 | 434 Count | 838 Count | 380 Count | 4.27 VDC | 0.16 VDC |
| 1777289720 | 412 Count | 808 Count | 360 Count | 4.23 VDC | 0.16 VDC |
| 1777286112 | 400 Count | 793 Count | 350 Count | 4.23 VDC | 0.14 VDC |
| 1777282504 | 386 Count | 772 Count | 338 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)