This is the latest recevied telemetry packets stored in our database for station/object OK1CDJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783243829 | 869 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783240226 | 868 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783236623 | 867 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783233020 | 866 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783229417 | 865 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783225814 | 864 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783222228 | 863 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783218625 | 862 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783215022 | 861 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783211419 | 860 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783207816 | 859 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783204213 | 858 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783200627 | 857 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783193421 | 855 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1783189818 | 854 Count | 492 Count | 0 Count | 0 VDC | 0 VDC |
| 1783182612 | 852 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783179027 | 851 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783175424 | 850 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783171821 | 849 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783168218 | 848 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783164615 | 847 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783161012 | 846 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783157429 | 845 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783153825 | 844 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1783150222 | 843 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)