This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768843819 | 0 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1768842919 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1768842019 | 0 Count | 436 Count | 0 Count | 0 VDC | 0 VDC |
| 1768841119 | 0 Count | 411 Count | 0 Count | 0 VDC | 0 VDC |
| 1768840219 | 0 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1768839319 | 0 Count | 365 Count | 0 Count | 0 VDC | 0 VDC |
| 1768838419 | 0 Count | 328 Count | 0 Count | 0 VDC | 0 VDC |
| 1768837519 | 0 Count | 302 Count | 0 Count | 0 VDC | 0 VDC |
| 1768836618 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1768835718 | 0 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1768834818 | 0 Count | 172 Count | 0 Count | 0 VDC | 0 VDC |
| 1768833918 | 0 Count | 144 Count | 0 Count | 0 VDC | 0 VDC |
| 1768833018 | 0 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1768832118 | 0 Count | 87 Count | 0 Count | 0 VDC | 0 VDC |
| 1768831218 | 0 Count | 58 Count | 0 Count | 0 VDC | 0 VDC |
| 1768830318 | 0 Count | 32 Count | 0 Count | 0 VDC | 0 VDC |
| 1768829418 | 0 Count | 1011 Count | 0 Count | 0 VDC | 0 VDC |
| 1768828518 | 0 Count | 980 Count | 0 Count | 0 VDC | 0 VDC |
| 1768827618 | 0 Count | 943 Count | 0 Count | 0 VDC | 0 VDC |
| 1768826718 | 0 Count | 909 Count | 0 Count | 0 VDC | 0 VDC |
| 1768825818 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1768824917 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1768824017 | 0 Count | 828 Count | 0 Count | 0 VDC | 0 VDC |
| 1768823117 | 0 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1768822217 | 0 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)