This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768831879 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768830739 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768829599 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768828459 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768827319 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768826179 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768825039 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768823899 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768822759 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1768821619 | 0 Count | 63 Count | 0 Count | 0 VDC | 0 VDC |
| 1768820479 | 0 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
| 1768819339 | 0 Count | 42 Count | 0 Count | 0 VDC | 0 VDC |
| 1768818199 | 0 Count | 39 Count | 0 Count | 0 VDC | 0 VDC |
| 1768817059 | 0 Count | 1011 Count | 0 Count | 0 VDC | 0 VDC |
| 1768815918 | 0 Count | 961 Count | 0 Count | 0 VDC | 0 VDC |
| 1768814779 | 0 Count | 914 Count | 0 Count | 0 VDC | 0 VDC |
| 1768813639 | 0 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1768812498 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768811358 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768810218 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768809078 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768807938 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768806798 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768805658 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1768804518 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)