This is the latest recevied telemetry packets stored in our database for station/object EA7HQG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785341482 | 211 Count | 226 Count | 77 Count | 0 VDC | 0 VDC |
| 1785339678 | 206 Count | 211 Count | 73 Count | 0 VDC | 0 VDC |
| 1785337875 | 192 Count | 186 Count | 68 Count | 0 VDC | 0 VDC |
| 1785336072 | 161 Count | 155 Count | 59 Count | 0 VDC | 0 VDC |
| 1785334268 | 121 Count | 122 Count | 41 Count | 0 VDC | 0 VDC |
| 1785332463 | 83 Count | 76 Count | 25 Count | 0 VDC | 0 VDC |
| 1785330697 | 49 Count | 51 Count | 16 Count | 0 VDC | 0 VDC |
| 1785328894 | 34 Count | 28 Count | 10 Count | 0 VDC | 0 VDC |
| 1785327091 | 570 Count | 1007 Count | 276 Count | 0 VDC | 0 VDC |
| 1785325288 | 547 Count | 989 Count | 270 Count | 0 VDC | 0 VDC |
| 1785323484 | 542 Count | 972 Count | 266 Count | 0 VDC | 0 VDC |
| 1785321681 | 500 Count | 944 Count | 255 Count | 0 VDC | 0 VDC |
| 1785319878 | 472 Count | 916 Count | 248 Count | 0 VDC | 0 VDC |
| 1785318075 | 444 Count | 891 Count | 241 Count | 0 VDC | 0 VDC |
| 1785316272 | 438 Count | 868 Count | 236 Count | 0 VDC | 0 VDC |
| 1785314469 | 432 Count | 834 Count | 231 Count | 0 VDC | 0 VDC |
| 1785312666 | 400 Count | 793 Count | 218 Count | 0 VDC | 0 VDC |
| 1785310863 | 393 Count | 759 Count | 212 Count | 0 VDC | 0 VDC |
| 1785309096 | 348 Count | 727 Count | 198 Count | 0 VDC | 0 VDC |
| 1785307293 | 340 Count | 693 Count | 191 Count | 0 VDC | 0 VDC |
| 1785305490 | 320 Count | 660 Count | 182 Count | 0 VDC | 0 VDC |
| 1785303686 | 312 Count | 626 Count | 175 Count | 0 VDC | 0 VDC |
| 1785301883 | 307 Count | 590 Count | 171 Count | 0 VDC | 0 VDC |
| 1785300080 | 300 Count | 557 Count | 165 Count | 0 VDC | 0 VDC |
| 1785298277 | 292 Count | 519 Count | 158 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)