This is the latest recevied telemetry packets stored in our database for station/object NA7CA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746150957 | 412 | 619 | 0 | 0 | 0 |
| 1746150598 | 459 | 614 | 0 | 0 | 0 |
| 1746150479 | 461 | 611 | 0 | 0 | 0 |
| 1746144780 | 415 | 627 | 0 | 0 | 0 |
| 1746144665 | 415 | 626 | 0 | 0 | 0 |
| 1746144182 | 450 | 623 | 0 | 0 | 0 |
| 1746143824 | 462 | 617 | 0 | 0 | 0 |
| 1746137252 | 417 | 627 | 0 | 0 | 0 |
| 1746135955 | 413 | 630 | 0 | 0 | 0 |
| 1746135477 | 473 | 629 | 0 | 0 | 0 |
| 1746135238 | 467 | 627 | 0 | 0 | 0 |
| 1746134880 | 451 | 626 | 0 | 0 | 0 |
| 1746134759 | 463 | 626 | 0 | 0 | 0 |
| 1746134639 | 462 | 625 | 0 | 0 | 0 |
| 1746134520 | 447 | 624 | 0 | 0 | 0 |
| 1746134401 | 449 | 623 | 0 | 0 | 0 |
| 1746133922 | 467 | 618 | 0 | 0 | 0 |
| 1746133564 | 463 | 612 | 0 | 0 | 0 |
| 1746125987 | 412 | 623 | 0 | 0 | 0 |
| 1746125270 | 475 | 622 | 0 | 0 | 0 |
| 1746125031 | 475 | 621 | 0 | 0 | 0 |
| 1746124553 | 457 | 617 | 0 | 0 | 0 |
| 1746123181 | 421 | 621 | 0 | 0 | 0 |
| 1746122942 | 418 | 618 | 0 | 0 | 0 |
| 1746122704 | 418 | 617 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)