This is the latest recevied telemetry packets stored in our database for station/object SP9EPW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788952666 | 163 Count | 552 Count | 27 Count | 0 VDC | 0 VDC |
| 1788950865 | 162 Count | 547 Count | 27 Count | 0 VDC | 0 VDC |
| 1788949064 | 160 Count | 539 Count | 26 Count | 0 VDC | 0 VDC |
| 1788945471 | 154 Count | 531 Count | 26 Count | 0 VDC | 0 VDC |
| 1788943670 | 153 Count | 526 Count | 26 Count | 0 VDC | 0 VDC |
| 1788941869 | 152 Count | 521 Count | 26 Count | 0 VDC | 0 VDC |
| 1788940068 | 151 Count | 516 Count | 26 Count | 0 VDC | 0 VDC |
| 1788938268 | 150 Count | 511 Count | 26 Count | 0 VDC | 0 VDC |
| 1788936468 | 149 Count | 509 Count | 26 Count | 0 VDC | 0 VDC |
| 1788934666 | 148 Count | 507 Count | 26 Count | 0 VDC | 0 VDC |
| 1788932865 | 147 Count | 505 Count | 26 Count | 0 VDC | 0 VDC |
| 1788931064 | 146 Count | 501 Count | 26 Count | 0 VDC | 0 VDC |
| 1788929264 | 145 Count | 497 Count | 26 Count | 0 VDC | 0 VDC |
| 1788927463 | 144 Count | 488 Count | 26 Count | 0 VDC | 0 VDC |
| 1788925662 | 143 Count | 484 Count | 26 Count | 0 VDC | 0 VDC |
| 1788923869 | 138 Count | 474 Count | 26 Count | 0 VDC | 0 VDC |
| 1788922069 | 137 Count | 468 Count | 26 Count | 0 VDC | 0 VDC |
| 1788920268 | 136 Count | 465 Count | 26 Count | 0 VDC | 0 VDC |
| 1788918467 | 135 Count | 461 Count | 26 Count | 0 VDC | 0 VDC |
| 1788916667 | 134 Count | 458 Count | 26 Count | 0 VDC | 0 VDC |
| 1788914867 | 133 Count | 454 Count | 26 Count | 0 VDC | 0 VDC |
| 1788913065 | 132 Count | 451 Count | 26 Count | 0 VDC | 0 VDC |
| 1788911264 | 131 Count | 447 Count | 26 Count | 0 VDC | 0 VDC |
| 1788909463 | 130 Count | 443 Count | 26 Count | 0 VDC | 0 VDC |
| 1788907663 | 129 Count | 439 Count | 26 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)