This is the latest recevied telemetry packets stored in our database for station/object BD3QYE-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762181125 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762180225 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762179325 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762178424 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762177524 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762176624 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762175723 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762174822 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762173922 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762173022 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762172122 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762171221 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762170321 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762169421 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762168521 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762167620 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762166719 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762165819 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762164919 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762164019 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762163119 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762162219 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1762161317 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762160417 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1762159516 | 12.1 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)