This is the latest recevied telemetry packets stored in our database for station/object KC0PDS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 05/29/2025 2:15:22 AM+00:00 | 393 | 603 | 0 | 0 | 0 |
| 05/29/2025 2:11:23 AM+00:00 | 468 | 597 | 0 | 0 | 0 |
| 05/29/2025 1:53:47 AM+00:00 | 449 | 607 | 0 | 0 | 0 |
| 05/29/2025 1:51:46 AM+00:00 | 446 | 607 | 0 | 0 | 0 |
| 05/29/2025 1:47:48 AM+00:00 | 453 | 606 | 0 | 0 | 0 |
| 05/29/2025 1:43:49 AM+00:00 | 451 | 605 | 0 | 0 | 0 |
| 05/29/2025 1:41:49 AM+00:00 | 450 | 605 | 0 | 0 | 0 |
| 05/29/2025 1:37:50 AM+00:00 | 447 | 604 | 0 | 0 | 0 |
| 05/29/2025 1:30:00 AM+00:00 | 449 | 600 | 0 | 0 | 0 |
| 05/29/2025 1:28:02 AM+00:00 | 447 | 599 | 0 | 0 | 0 |
| 05/29/2025 1:23:53 AM+00:00 | 443 | 595 | 0 | 0 | 0 |
| 05/29/2025 1:21:54 AM+00:00 | 472 | 592 | 0 | 0 | 0 |
| 05/29/2025 12:14:32 AM+00:00 | 445 | 596 | 0 | 0 | 0 |
| 05/29/2025 12:11:01 AM+00:00 | 449 | 587 | 0 | 0 | 0 |
| 05/28/2025 8:10:01 PM+00:00 | 454 | 610 | 0 | 0 | 0 |
| 05/28/2025 8:04:02 PM+00:00 | 463 | 607 | 0 | 0 | 0 |
| 05/28/2025 7:58:04 PM+00:00 | 447 | 603 | 0 | 0 | 0 |
| 05/28/2025 7:54:04 PM+00:00 | 469 | 597 | 0 | 0 | 0 |
| 05/28/2025 7:52:06 PM+00:00 | 446 | 592 | 0 | 0 | 0 |
| 05/28/2025 4:36:26 PM+00:00 | 435 | 606 | 0 | 0 | 0 |
| 05/28/2025 4:32:27 PM+00:00 | 448 | 604 | 0 | 0 | 0 |
| 05/28/2025 4:30:22 PM+00:00 | 441 | 603 | 0 | 0 | 0 |
| 05/28/2025 4:26:23 PM+00:00 | 448 | 600 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)