This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RF->INET* | INET->RF* | Repeater* | AllCount* | AllDrop* |
|---|---|---|---|---|---|
| 1745135237 | 99 | 0 | 0 | 0 | 0 |
| 1745134337 | 99 | 0 | 0 | 0 | 0 |
| 1745132537 | 99 | 0 | 0 | 0 | 0 |
| 1745131637 | 99 | 0 | 0 | 0 | 0 |
| 1745130737 | 99 | 0 | 0 | 0 | 0 |
| 1745129837 | 99 | 0 | 0 | 0 | 0 |
| 1745128937 | 99 | 0 | 0 | 0 | 0 |
| 1745128037 | 99 | 0 | 0 | 0 | 0 |
| 1745127137 | 99 | 0 | 0 | 0 | 0 |
| 1745126237 | 99 | 0 | 0 | 0 | 0 |
| 1745125337 | 99 | 0 | 0 | 0 | 0 |
| 1745124437 | 99 | 0 | 0 | 0 | 0 |
| 1745123537 | 99 | 0 | 0 | 0 | 0 |
| 1745122637 | 99 | 0 | 0 | 0 | 0 |
| 1745121737 | 99 | 0 | 0 | 0 | 0 |
| 1745120837 | 99 | 0 | 0 | 0 | 0 |
| 1745120762 | 99 | 0 | 0 | 0 | 0 |
| 1745119862 | 99 | 0 | 0 | 0 | 0 |
| 1745118962 | 99 | 0 | 0 | 0 | 0 |
| 1745118062 | 99 | 0 | 0 | 0 | 0 |
| 1745117162 | 99 | 0 | 0 | 0 | 0 |
| 1745116262 | 99 | 0 | 0 | 0 | 0 |
| 1745115362 | 99 | 0 | 0 | 0 | 0 |
| 1745114462 | 99 | 0 | 0 | 0 | 0 |
| 1745113562 | 99 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RF->INET: 0, 1, 0
INET->RF: 0, 1, 0
Repeater: 0, 1, 0
AllCount: 0, 1, 0
AllDrop: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)