This is the latest recevied telemetry packets stored in our database for station/object SP5JWP-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753338412 | 3.34 VDC | 0 VDC | 0 | 0 | 0 |
| 1753337511 | 3.38 VDC | 0 VDC | 0 | 0 | 0 |
| 1753336611 | 3.39 VDC | 0 VDC | 0 | 0 | 0 |
| 1753335710 | 3.4 VDC | 0 VDC | 0 | 0 | 0 |
| 1753334809 | 3.4 VDC | 0 VDC | 0 | 0 | 0 |
| 1753333909 | 3.42 VDC | 0 VDC | 0 | 0 | 0 |
| 1753333008 | 3.43 VDC | 0 VDC | 0 | 0 | 0 |
| 1753332107 | 3.44 VDC | 0 VDC | 0 | 0 | 0 |
| 1753331207 | 3.45 VDC | 0 VDC | 0 | 0 | 0 |
| 1753330306 | 3.46 VDC | 0 VDC | 0 | 0 | 0 |
| 1753329405 | 3.46 VDC | 0 VDC | 0 | 0 | 0 |
| 1753328505 | 3.47 VDC | 0 VDC | 0 | 0 | 0 |
| 1753327604 | 3.47 VDC | 0 VDC | 0 | 0 | 0 |
| 1753326703 | 3.48 VDC | 0 VDC | 0 | 0 | 0 |
| 1753325804 | 3.49 VDC | 0 VDC | 0 | 0 | 0 |
| 1753324902 | 3.49 VDC | 0 VDC | 0 | 0 | 0 |
| 1753324001 | 3.49 VDC | 0 VDC | 0 | 0 | 0 |
| 1753323101 | 3.51 VDC | 0 VDC | 0 | 0 | 0 |
| 1753322200 | 3.52 VDC | 0 VDC | 0 | 0 | 0 |
| 1753321299 | 3.52 VDC | 0 VDC | 0 | 0 | 0 |
| 1753320399 | 3.53 VDC | 0 VDC | 0 | 0 | 0 |
| 1753319498 | 3.54 VDC | 0 VDC | 0 | 0 | 0 |
| 1753318597 | 3.55 VDC | 0 VDC | 0 | 0 | 0 |
| 1753317697 | 3.57 VDC | 0 VDC | 0 | 0 | 0 |
| 1753316796 | 3.59 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)