This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1792901247 | 4.2 VDC | 180 pkt/h | 52 pkt/h | 128 pkt/h | 0 |
| 1792900348 | 4.19 VDC | 188 pkt/h | 48 pkt/h | 140 pkt/h | 0 |
| 1792899449 | 4.19 VDC | 256 pkt/h | 72 pkt/h | 184 pkt/h | 0 |
| 1792898550 | 4.2 VDC | 220 pkt/h | 60 pkt/h | 160 pkt/h | 0 |
| 1792897651 | 4.22 VDC | 324 pkt/h | 52 pkt/h | 272 pkt/h | 0 |
| 1792896752 | 4.2 VDC | 268 pkt/h | 60 pkt/h | 208 pkt/h | 0 |
| 1792895859 | 4.2 VDC | 268 pkt/h | 64 pkt/h | 204 pkt/h | 0 |
| 1792894953 | 4.2 VDC | 268 pkt/h | 72 pkt/h | 196 pkt/h | 0 |
| 1792894054 | 4.19 VDC | 260 pkt/h | 68 pkt/h | 192 pkt/h | 0 |
| 1792891355 | 4.19 VDC | 256 pkt/h | 84 pkt/h | 172 pkt/h | 0 |
| 1792890456 | 4.21 VDC | 227 pkt/h | 59 pkt/h | 168 pkt/h | 0 |
| 1792889538 | 4.19 VDC | 252 pkt/h | 64 pkt/h | 188 pkt/h | 0 |
| 1792888645 | 4.19 VDC | 240 pkt/h | 72 pkt/h | 168 pkt/h | 0 |
| 1792887739 | 4.2 VDC | 220 pkt/h | 60 pkt/h | 160 pkt/h | 0 |
| 1792886840 | 4.2 VDC | 267 pkt/h | 80 pkt/h | 187 pkt/h | 0 |
| 1792885938 | 4.2 VDC | 240 pkt/h | 60 pkt/h | 180 pkt/h | 0 |
| 1792884138 | 4.21 VDC | 252 pkt/h | 84 pkt/h | 168 pkt/h | 0 |
| 1792883240 | 4.2 VDC | 296 pkt/h | 96 pkt/h | 200 pkt/h | 0 |
| 1792882341 | 4.19 VDC | 252 pkt/h | 76 pkt/h | 176 pkt/h | 0 |
| 1792881442 | 4.2 VDC | 284 pkt/h | 68 pkt/h | 216 pkt/h | 0 |
| 1792880543 | 4.2 VDC | 288 pkt/h | 72 pkt/h | 216 pkt/h | 0 |
| 1792879645 | 4.2 VDC | 300 pkt/h | 76 pkt/h | 224 pkt/h | 0 |
| 1792878746 | 4.19 VDC | 240 pkt/h | 68 pkt/h | 172 pkt/h | 0 |
| 1792877847 | 4.2 VDC | 216 pkt/h | 56 pkt/h | 160 pkt/h | 0 |
| 1792876948 | 4.17 VDC | 252 pkt/h | 44 pkt/h | 208 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)