This is the latest recevied telemetry packets stored in our database for station/object F5MIW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792889298 | 232 Count | 958 Count | 191 Count | 0 VDC | 0 VDC |
| 1792885694 | 231 Count | 941 Count | 191 Count | 0 VDC | 0 VDC |
| 1792882089 | 230 Count | 927 Count | 191 Count | 0 VDC | 0 VDC |
| 1792878485 | 229 Count | 912 Count | 191 Count | 0 VDC | 0 VDC |
| 1792874881 | 228 Count | 899 Count | 191 Count | 0 VDC | 0 VDC |
| 1792871277 | 227 Count | 884 Count | 191 Count | 0 VDC | 0 VDC |
| 1792867697 | 226 Count | 872 Count | 191 Count | 0 VDC | 0 VDC |
| 1792864092 | 225 Count | 858 Count | 191 Count | 0 VDC | 0 VDC |
| 1792860488 | 224 Count | 843 Count | 191 Count | 0 VDC | 0 VDC |
| 1792856884 | 223 Count | 827 Count | 191 Count | 0 VDC | 0 VDC |
| 1792853280 | 222 Count | 811 Count | 191 Count | 0 VDC | 0 VDC |
| 1792849675 | 221 Count | 794 Count | 191 Count | 0 VDC | 0 VDC |
| 1792846092 | 220 Count | 780 Count | 191 Count | 0 VDC | 0 VDC |
| 1792842488 | 173 Count | 696 Count | 145 Count | 0 VDC | 0 VDC |
| 1792838883 | 172 Count | 680 Count | 145 Count | 0 VDC | 0 VDC |
| 1792835279 | 163 Count | 642 Count | 137 Count | 0 VDC | 0 VDC |
| 1792831672 | 124 Count | 565 Count | 99 Count | 0 VDC | 0 VDC |
| 1792828067 | 123 Count | 551 Count | 99 Count | 0 VDC | 0 VDC |
| 1792824496 | 122 Count | 538 Count | 99 Count | 0 VDC | 0 VDC |
| 1792820892 | 121 Count | 522 Count | 99 Count | 0 VDC | 0 VDC |
| 1792817287 | 120 Count | 507 Count | 99 Count | 0 VDC | 0 VDC |
| 1792813683 | 119 Count | 490 Count | 99 Count | 0 VDC | 0 VDC |
| 1792810079 | 117 Count | 467 Count | 98 Count | 0 VDC | 0 VDC |
| 1792806475 | 116 Count | 452 Count | 98 Count | 0 VDC | 0 VDC |
| 1792802888 | 115 Count | 437 Count | 98 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)