This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1755134111 | 104 Count | 547 Count | 38 Count | 4.19 VDC | 0 VDC |
| 1755133810 | 103 Count | 540 Count | 38 Count | 4.19 VDC | 0 VDC |
| 1755133511 | 102 Count | 529 Count | 38 Count | 4.19 VDC | 0 VDC |
| 1755133211 | 101 Count | 521 Count | 38 Count | 4.19 VDC | 0 VDC |
| 1755132911 | 98 Count | 517 Count | 36 Count | 4.19 VDC | 0 VDC |
| 1755132611 | 97 Count | 506 Count | 36 Count | 4.19 VDC | 0 VDC |
| 1755132311 | 95 Count | 497 Count | 35 Count | 4.19 VDC | 0 VDC |
| 1755132012 | 94 Count | 493 Count | 35 Count | 4.19 VDC | 0 VDC |
| 1755131711 | 92 Count | 485 Count | 34 Count | 4.19 VDC | 0 VDC |
| 1755131412 | 90 Count | 473 Count | 33 Count | 4.19 VDC | 0 VDC |
| 1755131111 | 89 Count | 469 Count | 33 Count | 4.19 VDC | 0 VDC |
| 1755130812 | 88 Count | 461 Count | 33 Count | 4.19 VDC | 0 VDC |
| 1755130512 | 85 Count | 454 Count | 31 Count | 4.19 VDC | 0 VDC |
| 1755130213 | 84 Count | 443 Count | 31 Count | 4.19 VDC | 0 VDC |
| 1755129913 | 82 Count | 431 Count | 30 Count | 4.19 VDC | 0 VDC |
| 1755129612 | 81 Count | 423 Count | 30 Count | 4.19 VDC | 0 VDC |
| 1755129313 | 79 Count | 418 Count | 29 Count | 4.19 VDC | 0 VDC |
| 1755129013 | 78 Count | 407 Count | 29 Count | 4.19 VDC | 0 VDC |
| 1755128714 | 76 Count | 399 Count | 28 Count | 4.19 VDC | 0 VDC |
| 1755128414 | 74 Count | 394 Count | 27 Count | 4.19 VDC | 0 VDC |
| 1755128113 | 72 Count | 387 Count | 26 Count | 4.2 VDC | 0 VDC |
| 1755127813 | 71 Count | 373 Count | 26 Count | 4.2 VDC | 0 VDC |
| 1755127514 | 70 Count | 368 Count | 26 Count | 4.2 VDC | 0 VDC |
| 1755127214 | 69 Count | 364 Count | 26 Count | 4.2 VDC | 0 VDC |
| 1755126914 | 65 Count | 352 Count | 23 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)