This is the latest recevied telemetry packets stored in our database for station/object VE1DIY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 03/21/2025 5:53:35 PM+00:00 | 460 | 618 | 0 | 0 | 0 |
| 03/21/2025 5:52:08 PM+00:00 | 469 | 618 | 0 | 0 | 0 |
| 03/21/2025 5:51:43 PM+00:00 | 471 | 617 | 0 | 0 | 0 |
| 03/21/2025 5:51:28 PM+00:00 | 470 | 616 | 0 | 0 | 0 |
| 03/21/2025 5:51:22 PM+00:00 | 470 | 617 | 0 | 0 | 0 |
| 03/21/2025 5:50:26 PM+00:00 | 471 | 616 | 0 | 0 | 0 |
| 03/21/2025 5:49:58 PM+00:00 | 474 | 616 | 0 | 0 | 0 |
| 03/21/2025 5:48:21 PM+00:00 | 474 | 615 | 0 | 0 | 0 |
| 03/21/2025 5:46:46 PM+00:00 | 475 | 615 | 0 | 0 | 0 |
| 03/21/2025 5:46:03 PM+00:00 | 475 | 614 | 0 | 0 | 0 |
| 03/21/2025 5:45:02 PM+00:00 | 476 | 613 | 0 | 0 | 0 |
| 03/21/2025 5:43:45 PM+00:00 | 475 | 612 | 0 | 0 | 0 |
| 03/21/2025 5:42:15 PM+00:00 | 475 | 612 | 0 | 0 | 0 |
| 03/21/2025 5:40:47 PM+00:00 | 476 | 610 | 0 | 0 | 0 |
| 03/21/2025 5:38:29 PM+00:00 | 475 | 610 | 0 | 0 | 0 |
| 03/21/2025 5:35:32 PM+00:00 | 469 | 602 | 0 | 0 | 0 |
| 03/21/2025 5:33:35 PM+00:00 | 462 | 595 | 0 | 0 | 0 |
| 03/21/2025 5:11:51 PM+00:00 | 471 | 614 | 0 | 0 | 0 |
| 03/21/2025 5:10:44 PM+00:00 | 473 | 613 | 0 | 0 | 0 |
| 03/21/2025 5:10:29 PM+00:00 | 474 | 613 | 0 | 0 | 0 |
| 03/21/2025 5:08:18 PM+00:00 | 479 | 612 | 0 | 0 | 0 |
| 03/21/2025 5:06:50 PM+00:00 | 482 | 611 | 0 | 0 | 0 |
| 03/21/2025 5:05:35 PM+00:00 | 480 | 608 | 0 | 0 | 0 |
| 03/21/2025 5:04:05 PM+00:00 | 478 | 607 | 0 | 0 | 0 |
| 03/21/2025 5:02:37 PM+00:00 | 480 | 606 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)