This is the latest recevied telemetry packets stored in our database for station/object SR8MBR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792862477 | 240 Count | 595 Count | 0 Count | 0 VDC | 0 VDC |
| 1792860676 | 214 Count | 528 Count | 0 Count | 0 VDC | 0 VDC |
| 1792858876 | 180 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1792857075 | 154 Count | 385 Count | 0 Count | 0 VDC | 0 VDC |
| 1792855274 | 128 Count | 299 Count | 0 Count | 0 VDC | 0 VDC |
| 1792853474 | 106 Count | 241 Count | 0 Count | 0 VDC | 0 VDC |
| 1792851673 | 79 Count | 169 Count | 0 Count | 0 VDC | 0 VDC |
| 1792849880 | 53 Count | 116 Count | 0 Count | 0 VDC | 0 VDC |
| 1792848079 | 26 Count | 55 Count | 0 Count | 0 VDC | 0 VDC |
| 1792846279 | 1000 Count | 974 Count | 0 Count | 0 VDC | 0 VDC |
| 1792844478 | 965 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1792842677 | 939 Count | 853 Count | 0 Count | 0 VDC | 0 VDC |
| 1792840876 | 905 Count | 828 Count | 0 Count | 0 VDC | 0 VDC |
| 1792839075 | 864 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1792837275 | 822 Count | 747 Count | 0 Count | 0 VDC | 0 VDC |
| 1792835474 | 767 Count | 702 Count | 0 Count | 0 VDC | 0 VDC |
| 1792833673 | 724 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1792831873 | 671 Count | 610 Count | 0 Count | 0 VDC | 0 VDC |
| 1792830072 | 619 Count | 560 Count | 0 Count | 0 VDC | 0 VDC |
| 1792828279 | 584 Count | 531 Count | 0 Count | 0 VDC | 0 VDC |
| 1792826478 | 538 Count | 486 Count | 0 Count | 0 VDC | 0 VDC |
| 1792824678 | 505 Count | 460 Count | 0 Count | 0 VDC | 0 VDC |
| 1792822877 | 465 Count | 427 Count | 0 Count | 0 VDC | 0 VDC |
| 1792821076 | 430 Count | 396 Count | 0 Count | 0 VDC | 0 VDC |
| 1792819275 | 392 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)