This is the latest recevied telemetry packets stored in our database for station/object SQ7PKP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777386807 | 304 Count | 847 Count | 56 Count | 0 VDC | 0 VDC |
| 1777385605 | 302 Count | 845 Count | 56 Count | 0 VDC | 0 VDC |
| 1777385004 | 301 Count | 844 Count | 56 Count | 0 VDC | 0 VDC |
| 1777383803 | 299 Count | 842 Count | 56 Count | 0 VDC | 0 VDC |
| 1777383203 | 298 Count | 841 Count | 56 Count | 0 VDC | 0 VDC |
| 1777382601 | 297 Count | 840 Count | 56 Count | 0 VDC | 0 VDC |
| 1777382000 | 296 Count | 839 Count | 56 Count | 0 VDC | 0 VDC |
| 1777380799 | 294 Count | 837 Count | 56 Count | 0 VDC | 0 VDC |
| 1777378996 | 291 Count | 829 Count | 56 Count | 0 VDC | 0 VDC |
| 1777377795 | 289 Count | 827 Count | 56 Count | 0 VDC | 0 VDC |
| 1777377194 | 288 Count | 826 Count | 56 Count | 0 VDC | 0 VDC |
| 1777375993 | 286 Count | 823 Count | 56 Count | 0 VDC | 0 VDC |
| 1777374790 | 284 Count | 821 Count | 56 Count | 0 VDC | 0 VDC |
| 1777372988 | 281 Count | 818 Count | 56 Count | 0 VDC | 0 VDC |
| 1777371185 | 278 Count | 815 Count | 56 Count | 0 VDC | 0 VDC |
| 1777369984 | 276 Count | 813 Count | 56 Count | 0 VDC | 0 VDC |
| 1777368782 | 274 Count | 811 Count | 56 Count | 0 VDC | 0 VDC |
| 1777368181 | 273 Count | 810 Count | 56 Count | 0 VDC | 0 VDC |
| 1777366980 | 271 Count | 808 Count | 56 Count | 0 VDC | 0 VDC |
| 1777366407 | 266 Count | 807 Count | 56 Count | 0 VDC | 0 VDC |
| 1777365807 | 265 Count | 806 Count | 56 Count | 0 VDC | 0 VDC |
| 1777365206 | 264 Count | 805 Count | 56 Count | 0 VDC | 0 VDC |
| 1777364605 | 263 Count | 803 Count | 56 Count | 0 VDC | 0 VDC |
| 1777363403 | 261 Count | 801 Count | 56 Count | 0 VDC | 0 VDC |
| 1777362803 | 260 Count | 800 Count | 56 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)