K0FTT Automobiles

My position About ☰

reset

LZ0VRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Presaure*	Power*
1753292478	33.08 C	31.34 %RH	969 hPa	5.69 V
1753292469	33.08 C	31.13 %RH	969 hPa	5.61 V
1753292169	33.08 C	31.09 %RH	969 hPa	5.66 V
1753291878	33.09 C	31 %RH	969 hPa	5.6 V
1753291869	33.09 C	30.92 %RH	969 hPa	5.66 V
1753291569	33.29 C	30.55 %RH	969 hPa	5.68 V
1753291278	33.4 C	30.4 %RH	969 hPa	5.64 V
1753291270	33.38 C	30.41 %RH	969 hPa	5.61 V
1753290969	33.59 C	30.26 %RH	968 hPa	5.66 V
1753290678	33.79 C	29.53 %RH	968 hPa	5.6 V
1753290670	33.79 C	29.63 %RH	968 hPa	5.62 V
1753290369	34.13 C	29.05 %RH	969 hPa	5.61 V
1753290078	34.36 C	28.9 %RH	969 hPa	5.67 V
1753290069	34.34 C	28.68 %RH	969 hPa	5.64 V
1753289769	34.38 C	28.7 %RH	968 hPa	5.68 V
1753289479	34.5 C	28.67 %RH	968 hPa	5.68 V
1753289469	34.52 C	28.81 %RH	968 hPa	5.61 V
1753289169	35.47 C	27.38 %RH	968 hPa	5.66 V
1753288878	35.77 C	26.71 %RH	969 hPa	5.62 V
1753288869	35.77 C	26.62 %RH	969 hPa	5.6 V
1753288569	34.88 C	27.9 %RH	969 hPa	5.68 V
1753288279	34.36 C	28.82 %RH	968 hPa	5.61 V
1753288269	34.36 C	28.82 %RH	968 hPa	5.67 V
1753287969	34.56 C	28.64 %RH	968 hPa	5.63 V
1753287679	34.9 C	27.95 %RH	968 hPa	5.6 V

*Used Equation Coefficients:

Temp: 0, 0.01, 0

Humi: 0, 0.01, 0

Presaure: 0, 1, 0

Power: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)