This is the latest recevied telemetry packets stored in our database for station/object SP9RUT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793615486 | 227 Count | 305 Count | 0 Count | 0 VDC | 0 VDC |
| 1793608286 | 113 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1793601086 | 802 Count | 1052 Count | 0 Count | 0 VDC | 0 VDC |
| 1793593886 | 688 Count | 908 Count | 0 Count | 0 VDC | 0 VDC |
| 1793586685 | 574 Count | 766 Count | 0 Count | 0 VDC | 0 VDC |
| 1793579485 | 460 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1793572285 | 346 Count | 497 Count | 0 Count | 0 VDC | 0 VDC |
| 1793565085 | 231 Count | 355 Count | 0 Count | 0 VDC | 0 VDC |
| 1793557885 | 115 Count | 191 Count | 0 Count | 0 VDC | 0 VDC |
| 1793550684 | 574 Count | 1024 Count | 0 Count | 0 VDC | 0 VDC |
| 1793543484 | 457 Count | 840 Count | 0 Count | 0 VDC | 0 VDC |
| 1793536284 | 342 Count | 584 Count | 0 Count | 0 VDC | 0 VDC |
| 1793529084 | 228 Count | 385 Count | 0 Count | 0 VDC | 0 VDC |
| 1793521884 | 115 Count | 170 Count | 0 Count | 0 VDC | 0 VDC |
| 1793514684 | 685 Count | 1128 Count | 0 Count | 0 VDC | 0 VDC |
| 1793507484 | 571 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1793500284 | 458 Count | 737 Count | 0 Count | 0 VDC | 0 VDC |
| 1793493083 | 345 Count | 564 Count | 0 Count | 0 VDC | 0 VDC |
| 1793485883 | 230 Count | 389 Count | 0 Count | 0 VDC | 0 VDC |
| 1793478684 | 115 Count | 199 Count | 0 Count | 0 VDC | 0 VDC |
| 1793471484 | 569 Count | 1063 Count | 0 Count | 0 VDC | 0 VDC |
| 1793464283 | 453 Count | 839 Count | 0 Count | 0 VDC | 0 VDC |
| 1793457083 | 335 Count | 614 Count | 0 Count | 0 VDC | 0 VDC |
| 1793449883 | 225 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1793442683 | 113 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)