This is the latest recevied telemetry packets stored in our database for station/object EA8EE-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1751208787 | 35.04 C | 52.3 % | 1005 hPa | 3.34 V | 10 |
| 1751208767 | 35.04 C | 52.2 % | 1005 hPa | 3.34 V | 10 |
| 1751208750 | 35.02 C | 52.3 % | 1005 hPa | 3.35 V | 10 |
| 1751208730 | 35 C | 52.2 % | 1005 hPa | 3.35 V | 10 |
| 1751208707 | 34.99 C | 52.3 % | 1005 hPa | 3.35 V | 10 |
| 1751208665 | 34.95 C | 52.6 % | 1005 hPa | 3.35 V | 11 |
| 1751208636 | 34.93 C | 52.7 % | 1005 hPa | 3.36 V | 9 |
| 1751208618 | 34.93 C | 52.6 % | 1005 hPa | 3.36 V | 9 |
| 1751208597 | 34.93 C | 52.5 % | 1005 hPa | 3.09 V | 9 |
| 1751208579 | 34.93 C | 52.5 % | 1005 hPa | 3.37 V | 10 |
| 1751208561 | 34.93 C | 52.8 % | 1005 hPa | 3.37 V | 10 |
| 1751208543 | 34.93 C | 52.4 % | 1005 hPa | 3.37 V | 10 |
| 1751208511 | 34.93 C | 52.4 % | 1005 hPa | 3.37 V | 9 |
| 1751208483 | 34.91 C | 52.4 % | 1005 hPa | 3.38 V | 9 |
| 1751208420 | 34.88 C | 52.4 % | 1005 hPa | 3.39 V | 8 |
| 1751208358 | 34.84 C | 52.6 % | 1005 hPa | 3.39 V | 6 |
| 1751208295 | 34.77 C | 53 % | 1005 hPa | 3.39 V | 7 |
| 1751208255 | 34.75 C | 52.9 % | 1005 hPa | 3.39 V | 7 |
| 1751208237 | 34.74 C | 53 % | 1005 hPa | 3.39 V | 8 |
| 1751208215 | 34.72 C | 52.8 % | 1005 hPa | 3.4 V | 9 |
| 1751208194 | 34.72 C | 53.4 % | 1005 hPa | 3.4 V | 9 |
| 1751208173 | 34.72 C | 53 % | 1005 hPa | 3.41 V | 6 |
| 1751208150 | 34.72 C | 52.8 % | 1005 hPa | 3.41 V | 8 |
| 1751208132 | 34.74 C | 52.7 % | 1005 hPa | 3.41 V | 8 |
| 1751208112 | 34.74 C | 52.8 % | 1005 hPa | 3.41 V | 9 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)