This is the latest recevied telemetry packets stored in our database for station/object CT2HRE-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768212364 | 17.9 C | 1026.75 hPa | 0 | 0 | 0 |
| 1768206814 | 18.6 C | 1028.5 hPa | 0 | 0 | 0 |
| 1768206597 | 17.7 C | 1027 hPa | 0 | 0 | 0 |
| 1768203112 | 22.1 C | 1028.25 hPa | 0 | 0 | 0 |
| 1768202845 | 21.4 C | 1025 hPa | 0 | 0 | 0 |
| 1768202659 | 20.8 C | 1027 hPa | 0 | 0 | 0 |
| 1768201832 | 18.4 C | 1025.88 hPa | 0 | 0 | 0 |
| 1768201646 | 17.5 C | 1032 hPa | 0 | 0 | 0 |
| 1768201473 | 16.5 C | 1033.88 hPa | 0 | 0 | 0 |
| 1768201311 | 15.7 C | 1031.63 hPa | 0 | 0 | 0 |
| 1768201060 | 14.4 C | 1008.13 hPa | 0 | 0 | 0 |
| 1768200992 | 14 C | 1011 hPa | 0 | 0 | 0 |
| 1768137497 | 21.1 C | 0 hPa | 0 | 0 | 0 |
| 1768136754 | 21.4 C | 1030.25 hPa | 0 | 0 | 0 |
| 1768136571 | 21.3 C | 1033.25 hPa | 0 | 0 | 0 |
| 1768136350 | 21 C | 1034.5 hPa | 0 | 0 | 0 |
| 1768136134 | 20.7 C | 1031 hPa | 0 | 0 | 0 |
| 1768135312 | 21.1 C | 1033.5 hPa | 0 | 0 | 0 |
| 1768133076 | 21.8 C | 1033.5 hPa | 0 | 0 | 0 |
| 1768130714 | 20.8 C | 1031.63 hPa | 0 | 0 | 0 |
| 1768130349 | 20.1 C | 1032.25 hPa | 0 | 0 | 0 |
| 1768130150 | 19.6 C | 0 hPa | 0 | 0 | 0 |
| 1768129450 | 17.8 C | 1033.13 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)