This is the latest recevied telemetry packets stored in our database for station/object UB1ATP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | LoadAvg5m* | MemUsed* | Temp* | AudioLvl* | Value5* |
|---|---|---|---|---|---|
| 1754511493 | 0.3 | 3 % | 44 C | 95 | 0 |
| 1754510593 | 0.3 | 3 % | 41 C | 95 | 0 |
| 1754509693 | 0.3 | 3 % | 43 C | 94 | 0 |
| 1754508793 | 0.3 | 3 % | 43 C | 96 | 0 |
| 1754507893 | 0.3 | 3 % | 42 C | 96 | 0 |
| 1754506993 | 0.3 | 3 % | 43 C | 96 | 0 |
| 1754506093 | 0.3 | 3 % | 43 C | 96 | 0 |
| 1754505192 | 0.3 | 3 % | 43 C | 96 | 0 |
| 1754504292 | 0.3 | 3 % | 43 C | 96 | 0 |
| 1754503392 | 0.3 | 3 % | 44 C | 94 | 0 |
| 1754502492 | 0.3 | 3 % | 43 C | 95 | 0 |
| 1754501593 | 0.3 | 3 % | 44 C | 95 | 0 |
| 1754500693 | 0.3 | 3 % | 43 C | 96 | 0 |
| 1754499793 | 0.3 | 3 % | 44 C | 95 | 0 |
| 1754498893 | 0.3 | 3 % | 44 C | 95 | 0 |
| 1754497993 | 0.3 | 3 % | 44 C | 95 | 0 |
| 1754497093 | 0.3 | 3 % | 44 C | 94 | 0 |
| 1754496193 | 0.4 | 3 % | 45 C | 95 | 0 |
| 1754495293 | 0.3 | 3 % | 44 C | 94 | 0 |
| 1754494393 | 0.3 | 3 % | 43 C | 94 | 0 |
| 1754493493 | 0.3 | 3 % | 45 C | 95 | 0 |
| 1754492593 | 0.3 | 3 % | 44 C | 95 | 0 |
| 1754491692 | 0.3 | 3 % | 43 C | 95 | 0 |
| 1754490792 | 0.3 | 3 % | 45 C | 94 | 0 |
| 1754489892 | 0.3 | 3 % | 43 C | 96 | 0 |
*Used Equation Coefficients:
LoadAvg5m: 0, 0.1, 0
MemUsed: 0, 1, 0
Temp: 0, 1, 0
AudioLvl: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)