This is the latest recevied telemetry packets stored in our database for station/object DF7RW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792888732 | 420 VDC | 644 VDC | 0 | 0 | 0 |
| 1792881532 | 422 VDC | 646 VDC | 0 | 0 | 0 |
| 1792877932 | 425 VDC | 647 VDC | 0 | 0 | 0 |
| 1792867131 | 425 VDC | 651 VDC | 0 | 0 | 0 |
| 1792863531 | 422 VDC | 653 VDC | 0 | 0 | 0 |
| 1792859931 | 424 VDC | 655 VDC | 0 | 0 | 0 |
| 1792856331 | 425 VDC | 662 VDC | 0 | 0 | 0 |
| 1792852731 | 427 VDC | 672 VDC | 0 | 0 | 0 |
| 1792849131 | 423 VDC | 726 VDC | 0 | 0 | 0 |
| 1792845530 | 423 VDC | 725 VDC | 0 | 0 | 0 |
| 1792841930 | 419 VDC | 698 VDC | 0 | 0 | 0 |
| 1792838330 | 422 VDC | 690 VDC | 0 | 0 | 0 |
| 1792834730 | 424 VDC | 721 VDC | 0 | 0 | 0 |
| 1792831130 | 421 VDC | 702 VDC | 0 | 0 | 0 |
| 1792823930 | 420 VDC | 633 VDC | 0 | 0 | 0 |
| 1792816730 | 422 VDC | 634 VDC | 0 | 0 | 0 |
| 1792809529 | 426 VDC | 638 VDC | 0 | 0 | 0 |
| 1792805929 | 424 VDC | 639 VDC | 0 | 0 | 0 |
| 1792798729 | 426 VDC | 641 VDC | 0 | 0 | 0 |
| 1792795129 | 425 VDC | 642 VDC | 0 | 0 | 0 |
| 1792791529 | 426 VDC | 644 VDC | 0 | 0 | 0 |
| 1792787929 | 425 VDC | 596 VDC | 0 | 0 | 0 |
| 1792784328 | 421 VDC | 647 VDC | 0 | 0 | 0 |
| 1792780728 | 424 VDC | 593 VDC | 0 | 0 | 0 |
| 1792777128 | 426 VDC | 651 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 1, 0
V_Ext: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)